Strange problem with 2005 HD Heritage Softail Custom
- BRUMBEAR
- Legendary 1000
- Posts: 1227
- Joined: Sat Feb 04, 2006 3:27 am
- Real Name: Dave
- Sex: Male
- Years Riding: 40
- My Motorcycle: 2009 Buell 1125 CR
- Location: in limbo
Re: Strange problem with 2005 HD Heritage Softail Custom
ECM The Buell Uly has much the same problems I am not sure where your ecm is mounted the Uly well 08 and up is mounted under the seat and it presses down on the ecm and cracks it as the bike heats up the ecm expands and opens up and blatto she dies. Cools down and away ya go.
there aint nothin like it
-
- Rookie
- Posts: 2
- Joined: Wed Sep 04, 2013 1:45 am
- Real Name: Lee Melton
- Sex: Male
- Years Riding: 12
- My Motorcycle: 1999 Harley Road King
Re: Strange problem with 2005 HD Heritage Softail Custom
I had this problem, it was some what intermittent but it boiled down to replacing ignition parts. I replaced the coil, engine temp sensor, crank sensor, cleaned gas cap, and final the cam sensor. It turned out to be the cam sensor. Fortunately I had these spare parts on hand so the cost for me was minimal. But I have not had the problem since.
-
- Tricycle Squid
- Posts: 1
- Joined: Mon Jun 30, 2014 12:23 pm
- Real Name: Patrick Linley
- Sex: Male
- Years Riding: 35
- My Motorcycle: 2000 Harley Fatboy
Re: Strange problem with 2005 HD Heritage Softail Custom
I think the circuit breaker may be the problem on my 2000 FatBoy as well... now, where to find it? I have looked at several wiring diagrams, but they show 'portions' of the complete wiring picture... can't tell if I need to pull off the oil tank, or if it is behind/under the fuse box, etc.???
Any help would be appreciated!!
Any help would be appreciated!!