Total Motorcycle Community Forums

Checked both flanges and no alignment dowels or holes for the dowels to go into. I looked into this more carefully and the armature flange inside the alternator cover seems to be touching the gearbox flange first. Almost like the armature slid out of the housing. Can anybody with a CB1000 check that...

1995 Honda CB1000 Got a little problem with the alternator cover going back on. There is about an 1/8 - 1/16 gap between the cover and the mounting flange. The cover is snug onto the flange, seems to be on straight. I tried tapping the cover in place with a mallet and tightening the allen screws a l...

Trying to install a rear sprocket and noticed that the lug holes are recessed into the sprocket. The nuts are too big to fit into this recess and when tightened will only have about 1/8" contact. Should I mount the sprocket with the outside facing in, or just take the sprocket back? 95 CB1000 4...

The bike is a 95 CB1000 carburated w/ 20k. I get a high frequency vibration at 4000 and 7000 RPM, more noticeable at 7000 (9000 red line). It doesn't matter what gear I'm in or the speed. It will do it on the centerstand and while riding. Cluch engagement/disengagement dosen't seem to matter either....

I don't have either one. Maybe somebody with a owners or service manual can help me out here.

How can I find the chain size for this bike?

BikeBandit IPC shows 102L-120L RK EXCEL and 102L-120L DAIDO as OEM.
The chain on the bike is marked RK and 50FMO on each link alternating.



Thanks

D