Total Motorcycle Community Forums

Also the battery is new and terms clean and tight. As I said no volts going to anywhere on controls only have 13 volts at start relay and fuse box on main red wires.when key turned to on nothing at aux fuses.. Starter did turn briefly at first,but I tried applying 12 volts again and nothing,no light...

The bike is in Neutral but when key is turned to on there is nothing,it use to have headlight on and a clicking noise clicking coming from under back seat.I took off seat and there is a small relay attached to under seat.along with a box on top of fender beneath seat.the only 12vs I have is at start...

I have 13 volts going to key switch via the red/wht wire from fuse box when key is on.but when I turn key to on position voltage goes to 0.0 volts on red white wire and red wht wire.I checked continuity on orange wire from ignition key switch to fuse box.its good.so why when I turn on key switch to ...

Thanks for the info.what is,wiers is I have 12.8 v at starter relay and at first it jumped as I went across both post then nothing is it poss there is a 30 Amp fuse under seat somewhere blown ? I have nothing for power if so do you know where it is located Also the thing with me checking voltage at ...

Hi all I just bought a intruder 800. I bought new battery for it and turned on key there was a clicking noise coming from user pass seat.I removed seat and found a little relay attached to the underneath of seat every time I turned key to on it clicked.I had headlight but no indicator lights and no ...