master cylinder 82 kaw
-
dlmsmay
- Rookie
- Posts: 4
- Joined: Mon Aug 01, 2011 5:30 am
- Real Name: don
- Sex: Male
- Years Riding: 38
- My Motorcycle: 1982 kawasaki kz 100 csr m
master cylinder 82 kaw
i bought this bike at a junk yard and am working on resoring it. i cleaned the front master cylinder and the calipers and all of the parts looked good, but i ended up buying a master cylinder rebuild kit anyway because i can't get it to work. it just does not seem to want to build up pressure. i have filled the lines with fluid and i have not leaks. any ideas?
-
pchast
- Site Supporter - Silver
- Posts: 552
- Joined: Tue Sep 02, 2008 1:04 pm
- Real Name: Pete
- Sex: Male
- Years Riding: 10
- My Motorcycle: 1980 Suzuki GS550L, 2019 Zero DSR
- Location: Athens, NY
Re: master cylinder 82 kaw
Likely a bad bore in the MC with pitting or scratches. Otherwise bad hoses flexing instead of holding pressure.
2019 Zero DSR, 1980 Suzuki GS550L
-
Johnj
- Site Supporter - Platinum
- Posts: 3806
- Joined: Fri Nov 17, 2006 7:34 am
- Real Name: Johnny Strabler
- Sex: Male
- Years Riding: 34
- My Motorcycle: A Bolt of Lightning
- Location: Kansas City KS
Re: master cylinder 82 kaw
Hello and welcome to the forum.
Does this mean you disassembled and examined the master cylinder and both calipers. You might want to try vacuum bleeding. They sell a kit at the discount tool place.dlmsmay wrote:i cleaned the front master cylinder and the calipers and all of the parts looked good, but i ended up buying a master cylinder rebuild kit anyway because i can't get it to work.
People say I'm stupid and apathetic. I don't know what that means, and I don't care.
Always wear a helmet, eye protection, and protective clothing. Never ride under the influence of drugs or alcohol.
Always wear a helmet, eye protection, and protective clothing. Never ride under the influence of drugs or alcohol.
