Honda CB360 Solenoid

Message
Author
SCCB
Rookie
Rookie
Posts: 4
Joined: Thu Jul 27, 2017 1:04 am
Real Name: Jack
Sex: Male
My Motorcycle: CB360

Honda CB360 Solenoid

#1 Unread post by SCCB »

Got a new starter solenoid which has y/r and g/r wires and two posts. Old one has y/r and blk. wires and two posts where heavier wires attach it to the battery and main harness. Can I attach new y/r to y/r in harness and g/r to blk in harness then attach heavier wires from the harness and battery to the same posts on the solenoid as the old one?
Jack

SCCB
Rookie
Rookie
Posts: 4
Joined: Thu Jul 27, 2017 1:04 am
Real Name: Jack
Sex: Male
My Motorcycle: CB360

Re: Honda CB360 Solenoid

#2 Unread post by SCCB »

Clipped off the old connecter and put new male and female bullet fittings on the new solenoid wires. Attached new y/r to y/r in harness and g/r to blk in harness then attached heavier wires from the harness and battery to the same posts on the solenoid as the old ones. Bike starts right up. Everything works fine.
Jack

User avatar
NorthernPete
Moderator
Moderator
Posts: 3485
Joined: Mon May 02, 2005 4:24 pm
Real Name: Pete
Sex: Male
Years Riding: 11
My Motorcycle: 1988 Kawasaki Vulcan 1500
Location: Northern Ontario, Canada

Re: Honda CB360 Solenoid

#3 Unread post by NorthernPete »

There you go. When all else fails give er. Lol.
1988 VN1500
2009 GS500F

Post Reply