lowering a 2005 Suzuki GSXR 600

Message
Author
fishbone
Tricycle Squid
Tricycle Squid
Posts: 1
Joined: Thu Jan 11, 2007 4:15 pm
Sex: Male
Location: Ma

lowering a 2005 Suzuki GSXR 600

#1 Unread post by fishbone »

Hi
I found a 2005 Suzuki GSXR 600 for cheap, $3000
Can the suspension be lowered? Is it adjustable? Or do I have to buy new shocks?
It has a spec of 32" seat height
I'm 5'6...on a warm day!

I've been riding an older bike for a few years.
I know I could ride it...but I'd have to stop sometime!
Touching the ground with both feet would be nice!

Thanks in advance
User avatar
BuzZz
Site Supporter - Platinum
Site Supporter - Platinum
Posts: 4726
Joined: Sat Mar 20, 2004 12:02 am
Real Name: Never Used Here
Sex: Male
Years Riding: 47
My Motorcycle: makes my 'nads tingle
Location: Buttfluck Nowhere, Manitoba

#2 Unread post by BuzZz »

Remember that a properly set-up modern suspension will settle an inch or so when you sit on the bike.

If that's still not enough, you can buy lowering links for the rear suspension and slide the forks up in the triple clamps a smidge. You can also have the fork's travel and ride height shortened up at better suspension shops everywhere for a few hundred bucks.
No Witnesses.... :shifty:
Wrider
Site Supporter - Gold
Site Supporter - Gold
Posts: 5285
Joined: Wed Aug 16, 2006 1:46 pm
Real Name: Ryan
Sex: Male
Years Riding: 4
My Motorcycle: 2005 Kawasaki Z750S
Location: Colorado Springs, CO

#3 Unread post by Wrider »

It's a little late, but a guy here rides a 99 Busa, he's tall, but likes his bikes lowered, he flipped his dogbones in the back, the thing is VERY low now, also put lower bars on the front end and slipped the triple tree clamps down a little too... Looks nice actually!
Wrider
Have owned - 2001 Suzuki Volusia
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
User avatar
Sev
Site Supporter - Gold
Site Supporter - Gold
Posts: 7352
Joined: Sun Jun 06, 2004 7:52 pm
Sex: Male
Location: Sherwood Park, Alberta

#4 Unread post by Sev »

I can be. Just like BuzZz said. Only issue is you'll lose some clearance when going over some bumps... shouldn't be an issue. And your pegs scrape a little sooner haha. Make sure everything is properly torqued.
Of course I'm generalizing from a single example here, but everyone does that. At least I do.

[url=http://sirac-sev.blogspot.com/][img]http://i12.photobucket.com/albums/a227/Sevulturus/sig.jpg[/img][/url]
User avatar
Britjoe
Legendary
Legendary
Posts: 268
Joined: Sun May 01, 2005 2:19 pm
Sex: Male
Location: Calgary

#5 Unread post by Britjoe »

2005 Suzuki GSXR 600 for 3000 sounds a little cheap to me.
losening the adjuster up the shock will make the rear end lower, you can do it with a hammer and a screw driver, but you really need the right tool.
often they are seized and hard to adjust, another way is to get adjustable dog bones,
[img]http://members.shaw.ca/joe.d/webheader.jpg[/img]
Post Reply