any ideas??

Message
Author
telefunkin
Elite
Elite
Posts: 136
Joined: Tue Dec 19, 2006 5:51 pm
Sex: Male
Location: Summerside PE

any ideas??

#1 Unread post by telefunkin »

When I start my bike cold, it idles extremely low, to the point where I have to keep the throttle open or it will stall out. This is regardless of what position the choke is in and no matter how much gas I give it, it will not rev up past 1000rpms. After playing around a bit, I figured that if I start it, close the choke and hold the throttle wide open for about 10 seconds, it'll start to rev up, backfire and then everything runs fine until the next time I cold start.

If anyone has any ideas I'd love to hear them. It's an 1983 Yamaha XS400 Maxim. All stock.

James

User avatar
Sicko
Elite
Elite
Posts: 166
Joined: Sat Apr 14, 2007 9:00 am

#2 Unread post by Sicko »

Fubared carb linkage is the first thing that came to mind.
Don't worry, Be happy.

User avatar
Sev
Site Supporter - Gold
Site Supporter - Gold
Posts: 7352
Joined: Sun Jun 06, 2004 7:52 pm
Sex: Male
Location: Sherwood Park, Alberta

#3 Unread post by Sev »

What... is a carb linkage?
Of course I'm generalizing from a single example here, but everyone does that. At least I do.

[url=http://sirac-sev.blogspot.com/][img]http://i12.photobucket.com/albums/a227/Sevulturus/sig.jpg[/img][/url]

User avatar
Sicko
Elite
Elite
Posts: 166
Joined: Sat Apr 14, 2007 9:00 am

#4 Unread post by Sicko »

Carburetor linkage.
Don't worry, Be happy.

User avatar
Sev
Site Supporter - Gold
Site Supporter - Gold
Posts: 7352
Joined: Sun Jun 06, 2004 7:52 pm
Sex: Male
Location: Sherwood Park, Alberta

#5 Unread post by Sev »

Clear as mud, thanks.

As for the actual problem, sounds like clogged jets in the carbs, and possibly a dirty airfilter. I'd clean the former, and replace the latter.

Adjust the idle speed, then sync the carbs. Or get a mechanic to do it ;)
Of course I'm generalizing from a single example here, but everyone does that. At least I do.

[url=http://sirac-sev.blogspot.com/][img]http://i12.photobucket.com/albums/a227/Sevulturus/sig.jpg[/img][/url]

telefunkin
Elite
Elite
Posts: 136
Joined: Tue Dec 19, 2006 5:51 pm
Sex: Male
Location: Summerside PE

#6 Unread post by telefunkin »

Thanks for the tips, I already replaced the air filter so looks like the next step will be cleaning the jets.

telefunkin
Elite
Elite
Posts: 136
Joined: Tue Dec 19, 2006 5:51 pm
Sex: Male
Location: Summerside PE

#7 Unread post by telefunkin »

Okay, it's definately the carb. I gave it a few shots of carb cleaner and the problem disapeared. Hopefully that'll take care of the problem until next weekend when I can get some help taking the carb off and cleaning it. I never cleaned one before so I wanna make sure I have someone here that knows what they're doing.

Thanks again for the tips.

James

Post Reply