=[ 08 ninja 250 recall

Message

resage · #1 Unread post by **resage** » Sat Mar 29, 2008 4:39 pm

I received letter in mail from kawasaki that my 08 ninja 250r was recalled due to

"When the front fork is compressed, the brake hose may move forward and come in contact with the edge of the front fork" causing damage to break hose leaking out fluid.

Another, "An engine crankcase vent hole in the air cleaner case could be blocked by material left during the molding process. This could allow air pressure to build up in the engine and cause the cylinder head to cover gasket to be pushed out of place and leak oil."

Apparently its most of the 08 ninja 250s so I have to bring my bike into the shop and they have to replace some stuff and whatnot free of charge at least. And it happens to be that time for the 500 mile full service check.

Amuli · #2 Unread post by **Amuli** » Sat Mar 29, 2008 5:17 pm

Good to know, thanks for the heads up!

RhadamYgg · #3 Unread post by **RhadamYgg** » Sat Mar 29, 2008 6:41 pm

resage wrote:I received letter in mail from kawasaki that my 08 ninja 250r was recalled due to

"When the front fork is compressed, the brake hose may move forward and come in contact with the edge of the front fork" causing damage to break hose leaking out fluid.

Another, "An engine crankcase vent hole in the air cleaner case could be blocked by material left during the molding process. This could allow air pressure to build up in the engine and cause the cylinder head to cover gasket to be pushed out of place and leak oil."

Apparently its most of the 08 ninja 250s so I have to bring my bike into the shop and they have to replace some stuff and whatnot free of charge at least. And it happens to be that time for the 500 mile full service check.

Not good! But at least they are reaching out to fix.

RhadamYgg

mgdavis · #4 Unread post by **mgdavis** » Sun Mar 30, 2008 4:10 am

That sucks. I hope your bike isn't out of action for long.

Buying the first year of production = Volunteering as a Beta tester.

SBK15 · #5 Unread post by **SBK15** » Sun Mar 30, 2008 10:06 am

Is it ALL of the 08 ninjas? or just the ones sold in your area

#6 Unread post by **Sev** » Sun Mar 30, 2008 10:25 am

All the '08s. It involves replacing a small bracket, and then a small rubber plug. Should only be a couple minutes work to be honest.

TrueFaith · Sun Mar 30, 2008 11:52 am

Well, it's not really ALL of the 2008 Ninjas. The first ones that shipped to the US from the first production run had 3 different recalls. Kawasaki then recalled all of the ones from dealers that hadn't been sold yet and replaced them with models from a later production run that did not have those problems.
I have an '08 Ninja 250R that I bought several weeks ago and it has NONE of those recall issues. All 3 problems have been corrected on the production line in Thailand. Any Ninja now for sale at dealers is recall-free.
Anyone that bought one of the first 08' Ninjas can check their VIN on Kawasaki's website and find out if it is subject to recall.

Total Motorcycle Community Forums

=[ 08 ninja 250 recall

=[ 08 ninja 250 recall

Re: =[ 08 ninja 250 recall