Chrome Polish: what do you use?

Message
Author
User avatar
Wizzard
Legendary 1000
Legendary 1000
Posts: 1471
Joined: Tue Jun 28, 2005 12:56 am
Sex: Male
Location: Fresno, California

#11 Unread post by Wizzard »

I bought a can of Never Dull this morning for taking care of the pitting that is starting on my spokes and in between the spokes on the rims . Wasn't even sure if it was still available . Eureka , I luvs that stuff almost as much as I use to love Dyn-O-Bryte .
Regards, Wizzard
Forgot to mention that it works on all surfaces altho I would not use it on any of my painted surfaces . Works like a charm on aluminum .
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, throughly used up, totally worn out, and loudly proclaiming --- ' WOW, WHAT A RIDE!!!! ' " - Author Unknown

charlie67
Tricycle Squid
Tricycle Squid
Posts: 1
Joined: Fri Jul 29, 2005 7:51 am
Sex: Male
Location: easton,pa

shine ur bike

#12 Unread post by charlie67 »

eagle 1 never-dull chrome polish on painted and chrome surfaces do not use on aluminum parts try mothers mag and aluminum polish on those :)

9000white
Site Supporter - Gold
Site Supporter - Gold
Posts: 1321
Joined: Sat Jan 22, 2005 2:30 am
Sex: Male
Location: atlanta georgia

#13 Unread post by 9000white »

Wizzard wrote:I bought a can of Never Dull this morning for taking care of the pitting that is starting on my spokes and in between the spokes on the rims . Wasn't even sure if it was still available . Eureka , I luvs that stuff almost as much as I use to love Dyn-O-Bryte .
Regards, Wizzard
Forgot to mention that it works on all surfaces altho I would not use it on any of my painted surfaces . Works like a charm on aluminum .
i use 0000 steel wool on the spokes then carnuba wax.
dr bob

User avatar
Borris
Rookie
Rookie
Posts: 8
Joined: Sat Aug 13, 2005 5:28 am

#14 Unread post by Borris »

I read in a magazine article that using anything with amonia damages the chrome. Repeated use, depending on how thick the chrome layer is, will reveal the underlying nickel layer.

Post Reply