New 650 owner

Message

Jim · #1 Unread post by **Jim** » Sat Aug 27, 2005 8:21 pm

Hello Forum,

This is my first post so I don't know if I am doing
this right.

I have today just purchased my XJ650RJ Seca '82.

The starter button does not turn over the engine,
but to appy 12 volt directly to starter, it spins the
engine ok. I suspect a simple solution.

Jim
XJ650RJ Seca '82
SJ750RJ Seca '82
Mena, AR, USA

niterider · #2 Unread post by **niterider** » Sun Aug 28, 2005 3:40 am

Check that the safty on off switch is on the on position. Also this system has a solenoid simular to the ford automobiles had in yrs past. Check that the connections are clean and tight. I owned an XJ650 maxim yrs. ago, it was one of the best bikes that I ever owned. Hope this helps you find the problem.

Wizzard · #3 Unread post by **Wizzard** » Mon Aug 29, 2005 11:39 pm

Congratulations and welcome to the forums Jim .
Regards, Wizzard

sidecarguy · Tue Aug 30, 2005 1:30 am

hey i have the same bike!

check it out in the yamaha pics!

ehh can we see yours?

couldnt it be the sidestand switch or something?

anyway welcome!!

also theres a cj only website @ www.xjowners.com

Jim · #5 Unread post by **Jim** » Tue Sep 06, 2005 1:50 pm

Thanks for the warm welcome and for
your advice.

The red/w wire to the starter solenoid
is not hot with the ignition switch on.
I am chasing continuity using the
diagram on the XJCD.

Will post pics as soon as I learn how.

Jim

Aggroton · #6 Unread post by **Aggroton** » Wed Sep 07, 2005 6:08 am

cant wait to see pics...ihave a 550 and love it...good luck with the starter.

Total Motorcycle Community Forums

New 650 owner

New 650 owner

will not crank with button

hey!

Thanks