Total Motorcycle Community Forums

Got the pipes finished up. They turned out pretty well considering how they looked before.





Here they are with the chrome side covers on.





For comparison, Before:


After:



Somehow I forgot to order new gaskets so I'll have to wait to install the pipes until they come in the mail

Some weekend progress. I soda blasted the carbs and disassembled and cleaned the internals with carb cleaner. New stainless steel hardware along with new float bowl gaskets. I soaked them in pinesol for 3 days when I originally took them off and would not recommend that, as it seemed to make the brass parts stick to the aluminum, not to mention rusting the hardware.
In preparation for blasting



ready to reinstall.




Rebuilt the clutch slave cylinder along with both master cylinders as the clutch was not working when I got the bike. It was pretty cruddy inside.



I got the master cylinders mounted, and carbs back in. Just remember to hook up the throttle and choke cables BEFORE installing the carbs. Don't ask me how I know this

Here she is so far



After taking that pic, I realized the machining center behind the bike is another vintage Japanese machine. A 1984 Mori Seiki still running today after all the years, the Japs were definitely on their game in the '80's!

Back at home I was getting ready to reinstall the float in the tank when I heard some rust rattling around in the tank. I used an aquarium vacuum along with my shop vac to get it out. Guess I should of done this before paint, but no harm done.




Not much left to do now! Waiting for stainless brake lines to come in the mail along with new grips. I need to put all fluids in the bike and get a new gel battery. My church is having a car/motorcycle show in 2 weeks, my goal is to have it done by then.

Awesome rebuild, can't wait to see the final product. You should be real proud of yourself...

all finished

Beautiful work!

I agree, top job there, looks stunning. Hope you many many safe and fun filled miles

Wow. I'm jealous. And it makes me miss my CB650C a little bit

Whatd you use to polish the aluminum handrails, n howd you get the black "poo poo" off of them?

I’m going to assume since the op hadn’t been active since 2012 it’ll remain a mystery.

I use mothers polish personally.