fast start, should i practice this?

Message
Author
User avatar
Relsek
Legendary 300
Legendary 300
Posts: 346
Joined: Thu Mar 24, 2005 1:03 pm
Sex: Male
Location: Lakeland, Florida

#11 Unread post by Relsek »

JWF505 wrote:
JWF505 wrote: ya, not the best starter bike but hey, if you can learn on that then you should be ok. As for slow clutch, man, you got a proformance bike, give it some juice and go, with a bike like that i would say you could almost, ALMOST, just drop the clutch and it would catch, but just give it a decent 5-7rpm and let the clutch go a little quicker, thats how i take off faster, just keep working.
5-7 rpm and release the clutch? hmmm... i'll try this next time i go to the under-used parking lot near here. although i'll just go w/ 5 rpm.

thanks

ya every bike is different, my 5-7rpm is my normal release range, 5 or so for normal, 7 and sometimes higher for a quicker start

JWF
DON'T do the 5k rpm then release the clutch thing. I let my son's friend ride my busa the other day and that is exactly what he began to do, I had to stop him before he released the clutch. I don't know about a 1000, but do that on a busa and you're in for a real surprise.
Last edited by Relsek on Sun Jan 15, 2006 11:06 am, edited 1 time in total.
[url=http://triphog.com]My name is Kevin, and I'm a triphog.[/url]

User avatar
VermilionX
Super Legendary 5000
Super Legendary 5000
Posts: 5996
Joined: Wed Dec 28, 2005 3:45 pm
Sex: Male
Years Riding: 6
My Motorcycle: '06 Suzuki GSX-R 750
Location: The Valley, SoCal

#12 Unread post by VermilionX »

ok, got it.

thank you very much for the warning.

whew!

i'll just stick to my 1-2rpm take offs.
Bikes Owned:
Gixxer 1000 K6 (stolen)
Gixxer 750 K6

Bikes Wanted:
VMAX
a super kewl cafe racer

Jamers!
Site Supporter - Gold
Site Supporter - Gold
Posts: 1194
Joined: Tue Oct 04, 2005 5:06 pm
Real Name: James
Sex: Male
My Motorcycle: 2015 Yamaha VX950(bolt)
Location: Los Angeles (818)

#13 Unread post by Jamers! »

Relsek wrote:
JWF505 wrote:
JWF505 wrote: ya, not the best starter bike but hey, if you can learn on that then you should be ok. As for slow clutch, man, you got a proformance bike, give it some juice and go, with a bike like that i would say you could almost, ALMOST, just drop the clutch and it would catch, but just give it a decent 5-7rpm and let the clutch go a little quicker, thats how i take off faster, just keep working.
5-7 rpm and release the clutch? hmmm... i'll try this next time i go to the under-used parking lot near here. although i'll just go w/ 5 rpm.

thanks

ya every bike is different, my 5-7rpm is my normal release range, 5 or so for normal, 7 and sometimes higher for a quicker start

JWF
DON'T do the 5k rpm then release the clutch thing. I let my son's friend ride my busa the other day and that is exactly what he began to do, I had to stop him before he released the clutch. I don't know about a 1000, but do that on a busa and you're in for a real surprise.

ya i could see where that might be a problem. On a small bike like mine 5k is a quick jump but manageable, on a Busa and probabaly his 1000 as well it may be to much. My mistake





JWF
Insert something clever and showing an understanding of motorcycle culture here

ATGATT

Sev wrote:What's a bike?
JWF505 wrote:its like a goat, but with two wheels.
JWF

User avatar
VermilionX
Super Legendary 5000
Super Legendary 5000
Posts: 5996
Joined: Wed Dec 28, 2005 3:45 pm
Sex: Male
Years Riding: 6
My Motorcycle: '06 Suzuki GSX-R 750
Location: The Valley, SoCal

#14 Unread post by VermilionX »

no problem

no harm done :wink:

i just finished reading the whole superbikeschool site...

man! it sounds like such a great idea... but damn! it will be a while before i can save up for the 2 day camp. :(
Bikes Owned:
Gixxer 1000 K6 (stolen)
Gixxer 750 K6

Bikes Wanted:
VMAX
a super kewl cafe racer

User avatar
jmillheiser
Legendary 2500
Legendary 2500
Posts: 2515
Joined: Thu Jul 14, 2005 5:27 pm
Sex: Male
Location: Cheyenne, WY

#15 Unread post by jmillheiser »

Easiest way to learn faster starts is to gradually increase the RPM and just do start after start.

Most guys who drag race street bikes tend to launch with a fair bit of RPMs but feather the clutch most of the way through first gear. This keeps the front wheel down but gets the bike moving fast.

the trick to fast starts is to learn EXACTLY where your friction zone starts and get to that spot as fast as possible then feather the clutch the rest of the way out. Only way to do this is to practice gentle starts

User avatar
Relsek
Legendary 300
Legendary 300
Posts: 346
Joined: Thu Mar 24, 2005 1:03 pm
Sex: Male
Location: Lakeland, Florida

#16 Unread post by Relsek »

JWF505 wrote:
Relsek wrote:
JWF505 wrote:
JWF505 wrote: ya, not the best starter bike but hey, if you can learn on that then you should be ok. As for slow clutch, man, you got a proformance bike, give it some juice and go, with a bike like that i would say you could almost, ALMOST, just drop the clutch and it would catch, but just give it a decent 5-7rpm and let the clutch go a little quicker, thats how i take off faster, just keep working.
5-7 rpm and release the clutch? hmmm... i'll try this next time i go to the under-used parking lot near here. although i'll just go w/ 5 rpm.

thanks

ya every bike is different, my 5-7rpm is my normal release range, 5 or so for normal, 7 and sometimes higher for a quicker start

JWF
DON'T do the 5k rpm then release the clutch thing. I let my son's friend ride my busa the other day and that is exactly what he began to do, I had to stop him before he released the clutch. I don't know about a 1000, but do that on a busa and you're in for a real surprise.

ya i could see where that might be a problem. On a small bike like mine 5k is a quick jump but manageable, on a Busa and probabaly his 1000 as well it may be to much. My mistake





JWF
I guess we all tend to think that most bikes are like ours so we give advise based on what we do. I know if I rode my wife's ninja 250 every day I'd have probably given the same.

Kevin
[url=http://triphog.com]My name is Kevin, and I'm a triphog.[/url]

Post Reply