Total Motorcycle Community Forums

Posted: **Sun Sep 21, 2008 12:03 pm**

I converted a Honda 5.5 Engine to a small 4 wheeler and now it will not pull it can someone help me with this. If you lift the bike up the wheels will turn but with any weight engine rev's and bike goes no where.
thanks Bob

Posted: **Sun Sep 21, 2008 5:19 pm**

Sounds like it's geared way too high.

Whatever system you're using for final drive, the sprocket/pulley on the engine should be smaller diameter, or the sprocket/pulley on the axle should be larger diameter, or both.

That's the best I can come up with given the limited info supplied.

Good Luck.

Posted: **Mon Sep 22, 2008 6:09 am**

Thanks that fixed it.

Posted: **Mon Sep 22, 2008 6:27 pm**

Posted: **Tue Sep 23, 2008 11:39 am**

BuzZz wrote:

I think you are mind reader...good call.