How do you handle twisty roads?
Posted: Sun Jun 19, 2005 6:23 pm
I believe as a new rider that one should ride in their comfort zone....comfort zone being different for everyone. In other words, your skill level, experience, confidence and type of road or bike all come into play.
I was accompanied home today along the Sunshine Coast Hwy by a 40 year veteran of riding. I have been licensed for 4 months.
On the straight stretches and the gentler curves I maintain the speed limit or a tad over, but when I get to the really tight curves, I blink the brake light to alert anyone behind me that I am slowing down, I gear down BEFORE the curve so that I enter the curve at a slower pace and as I reach the apex of the curve I accelerate so that I power out of the curve.
(oh, and for you speedy types....if I am holding up traffic, I find a safe place to pull in and let everyone go by. The last thing I need is an irate car driver behind me on that highway. )
When my acquaintance and I got to the ferry, he started to tell me how to ride. For example, he tried to tell me I should not be using my brakes. In my classes I learned to use the brake lights for communication to alert those behind me I am slowing down. (I'm thinking maybe he should have a refresher course on road safety.)
Anyway, the real issue here is his insistence that I go too slow in the curves. He said I should be powering up for the curves and take them faster. Even though I explained that I power out of the curve, he said I should go faster all the way through.
I told him, if I was to go faster, that would make the bike lean too much and I am still "gaining experience".
He says it would be easier to go around the curves faster because the bike is meant to lean. Yes, well, there is leaning and then there is leaning
I say I need to gain more skill and confidence before I start riding like a racer, because those extreme lean angles scare me. I don't have enough experience yet (nor the desire) to be taking those really tight turns at high speeds.
I told him, you ride your own ride, I will ride mine.
Anyway, I would be interested to know how others approach riding curves.
I was accompanied home today along the Sunshine Coast Hwy by a 40 year veteran of riding. I have been licensed for 4 months.
On the straight stretches and the gentler curves I maintain the speed limit or a tad over, but when I get to the really tight curves, I blink the brake light to alert anyone behind me that I am slowing down, I gear down BEFORE the curve so that I enter the curve at a slower pace and as I reach the apex of the curve I accelerate so that I power out of the curve.
(oh, and for you speedy types....if I am holding up traffic, I find a safe place to pull in and let everyone go by. The last thing I need is an irate car driver behind me on that highway. )
When my acquaintance and I got to the ferry, he started to tell me how to ride. For example, he tried to tell me I should not be using my brakes. In my classes I learned to use the brake lights for communication to alert those behind me I am slowing down. (I'm thinking maybe he should have a refresher course on road safety.)
Anyway, the real issue here is his insistence that I go too slow in the curves. He said I should be powering up for the curves and take them faster. Even though I explained that I power out of the curve, he said I should go faster all the way through.
I told him, if I was to go faster, that would make the bike lean too much and I am still "gaining experience".
He says it would be easier to go around the curves faster because the bike is meant to lean. Yes, well, there is leaning and then there is leaning
I say I need to gain more skill and confidence before I start riding like a racer, because those extreme lean angles scare me. I don't have enough experience yet (nor the desire) to be taking those really tight turns at high speeds.
I told him, you ride your own ride, I will ride mine.
Anyway, I would be interested to know how others approach riding curves.