Page 1 of 1

Wobble when I slow down when going over 60 on my HD FXDWG

Posted: Sun Aug 29, 2010 6:03 am
by DESERTRIVERRAT64
What causes my bike to wobble when I let off the gas when going over 60mph

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 6:27 am
by Johnj
Hard to say...check the head bearing, it might be a little lose.

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 7:09 am
by DESERTRIVERRAT64
Johnj wrote:Hard to say...check the head bearing, it might be a little lose.
where is the head bering

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 7:28 am
by Johnj
It's the one that the front end uses. I suggest you get a service manual. :|

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 7:41 am
by Gummiente
With the Wide Glide front end and skinny tire (unless you've installed a "cat squasher"), I agree with Johnj's suspicion about the steering head bearing. But if you don't know what that is and how it works, you'd be much better off taking the bike to a reputable mechanic to have it looked at.

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 7:47 am
by DESERTRIVERRAT64
Gummiente wrote:With the Wide Glide front end and skinny tire (unless you've installed a "cat squasher"), I agree with Johnj's suspicion about the steering head bearing. But if you don't know what that is and how it works, you'd be much better off taking the bike to a reputable mechanic to have it looked at.
Thank you

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 7:49 am
by Gummiente
DESERTRIVERRAT64 wrote:Thank you
No problemo. Now, how about a pic of your bike? 8) I've always liked the Wide Glide.

Re: Wobble when I slow down when going over 60 on my HD FXDW

Posted: Sun Aug 29, 2010 8:08 am
by DESERTRIVERRAT64
Gummiente wrote:With the Wide Glide front end and skinny tire (unless you've installed a "cat squasher"), I agree with Johnj's suspicion about the steering head bearing. But if you don't know what that is and how it works, you'd be much better off taking the bike to a reputable mechanic to have it looked at.
I t looks like I need a special tool to do that