Got a new starter solenoid which has y/r and g/r wires and two posts. Old one has y/r and blk. wires and two posts where heavier wires attach it to the battery and main harness. Can I attach new y/r to y/r in harness and g/r to blk in harness then attach heavier wires from the harness and battery to the same posts on the solenoid as the old one?
Jack
Honda CB360 Solenoid
-
SCCB
- Rookie
- Posts: 4
- Joined: Thu Jul 27, 2017 1:04 am
- Real Name: Jack
- Sex: Male
- My Motorcycle: CB360
Re: Honda CB360 Solenoid
Clipped off the old connecter and put new male and female bullet fittings on the new solenoid wires. Attached new y/r to y/r in harness and g/r to blk in harness then attached heavier wires from the harness and battery to the same posts on the solenoid as the old ones. Bike starts right up. Everything works fine.
Jack
Jack
-
NorthernPete
- Legendary 3000
- Posts: 3485
- Joined: Mon May 02, 2005 4:24 pm
- Real Name: Pete
- Sex: Male
- Years Riding: 11
- My Motorcycle: 1988 Kawasaki Vulcan 1500
- Location: Northern Ontario, Canada