Kick Start Help!

Message
Author
User avatar
Henriettaah
Elite
Elite
Posts: 227
Joined: Mon Aug 01, 2005 11:29 am
Sex: Male
Location: Sheffield, UK

Kick Start Help!

#1 Unread post by Henriettaah »

I can't start my bike!

Am I just being a weedy female (!) or might there be some other problem?

I started it this afternoon - and it caught first time and revved away nicely. Switched it off. Tried again later - it is *almost* catching, with a couple of splutters, but not properly so it is running. I can smell fuel - is this normal? Could the engine be flooded somehow? :? To get it to catch before, I gave a little throttle just at the end of the kick.

Its got fuel, I put another couple of litres in this afternoon wondering if it had been low to begin with.

Its flippin' hard work kickstarting over and over! :wink: Especially with my short legs.

User avatar
Wizzard
Legendary 1000
Legendary 1000
Posts: 1471
Joined: Tue Jun 28, 2005 12:56 am
Sex: Male
Location: Fresno, California

#2 Unread post by Wizzard »

Pull your spark plugs and see what condition they are in .
Regards, Wizzard
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, throughly used up, totally worn out, and loudly proclaiming --- ' WOW, WHAT A RIDE!!!! ' " - Author Unknown

User avatar
ZooTech
Legendary 3000
Legendary 3000
Posts: 3233
Joined: Mon Jun 13, 2005 3:23 am
Sex: Male
Years Riding: 18
My Motorcycle: Nomad / Ninja 500 / VLX Bobber / C3 / VS
Location: Ohio

#3 Unread post by ZooTech »

I agree. Two-strokes require pretty regular plug changes due to fouling. That's just the nature of the beast since the plugs fire on every other stroke, the engine typically spins faster than a four stroke, and the fuel is mixed with oil. Sometimes it's enough just to pull them out and wipe them down really well...or get yourself one of those little battery-operated plug cleaners. Hopefully the engine was designed with easy plug access in mind.

User avatar
Henriettaah
Elite
Elite
Posts: 227
Joined: Mon Aug 01, 2005 11:29 am
Sex: Male
Location: Sheffield, UK

#4 Unread post by Henriettaah »

ZooTech wrote:Two-strokes require pretty regular plug changes due to fouling. That's just the nature of the beast
Thats cool. Thanks guys - going to have a look tomorrow morning. Not a biggy to nip out and get some replacements if they can't be wiped down :)

User avatar
Kal
Site Supporter - Gold
Site Supporter - Gold
Posts: 2554
Joined: Sun Sep 12, 2004 8:08 am
Real Name: Jade
Sex: Female
Years Riding: 14
My Motorcycle: 1998 Kawasaki GPZ500S
Location: Nottingham, UK

#5 Unread post by Kal »

Forgive me for asking, but is your fuel tap on?


(done this one myself)
Kal...
Relationship Squid...

GPZ500S, CB250N, GB250Clubman

User avatar
jmillheiser
Legendary 2500
Legendary 2500
Posts: 2515
Joined: Thu Jul 14, 2005 5:27 pm
Sex: Male
Location: Cheyenne, WY

#6 Unread post by jmillheiser »

sounds flooded to me.

to clear it you might try turning the fuel tap off, and kicking it through a few times with the ignition turned off. Then turn the fuel tap back on and try to start the bike

User avatar
sapaul
Legendary 2000
Legendary 2000
Posts: 2387
Joined: Wed Jul 20, 2005 3:45 am
Sex: Male
Years Riding: 90
My Motorcycle: 2011 R1200R 07 BMW GS, Kymco 250 little
Location: South Africa

#7 Unread post by sapaul »

My little Suzi RV 90 would only kick start on 3/4 throttle no matter what I did and if I left the fuel tap on overnight it always flooded the plug. Bikes are normally as individual as you. You have to find out what their quirks are. OH also check your fuel filter.
I spent my therapy money an a K1200S
The therapy worked, I got a GS now
A touch of insanity crept back in the shape of an R1200R

User avatar
Henriettaah
Elite
Elite
Posts: 227
Joined: Mon Aug 01, 2005 11:29 am
Sex: Male
Location: Sheffield, UK

#8 Unread post by Henriettaah »

sapaul wrote:Bikes are normally as individual as you
I did wonder if it was a case of getting to know its quirks. Elsie is, after all, 20 years old! :)

I have a circuit tester to try and complete the wiring loom connections - but it seems that just having the ignition to 'on' doesn't send a current through. The bike has to be running. Is this typical?

P.s Yes, the fuel tap is 'on'. :)

User avatar
sapaul
Legendary 2000
Legendary 2000
Posts: 2387
Joined: Wed Jul 20, 2005 3:45 am
Sex: Male
Years Riding: 90
My Motorcycle: 2011 R1200R 07 BMW GS, Kymco 250 little
Location: South Africa

#9 Unread post by sapaul »

Yes the initial current is supplied when you kick your starter, then your magneto takes over. Are you switching your tap off when you are not riding. If not you will foul the plug and flood your carb.
I spent my therapy money an a K1200S
The therapy worked, I got a GS now
A touch of insanity crept back in the shape of an R1200R

User avatar
DivideOverflow
Legendary 1000
Legendary 1000
Posts: 1318
Joined: Wed Mar 23, 2005 3:19 pm
Sex: Male
Location: Florida, USA

#10 Unread post by DivideOverflow »

That is the first thing I thought of... I accidently left my bike on "pri" overnight once, and had a puddle of gas all over the floor.

Post Reply