A Fistfull of Questions
- JackoftheGreen
- Moderator
- Posts: 1219
- Joined: Sat Apr 21, 2012 8:10 pm
- Real Name: Eric
- Sex: Male
- Years Riding: 12
- My Motorcycle: Versys 1000 LE "Gleep"
- Location: Northern Utah
- Contact:
A Fistfull of Questions
Alright, one more post today, then I'm going to quit talking about the bike and go ride it.
I mentioned in another post that I'm a fairly competent car mechanic, but that motorcycle mechanics are new to me. To further complicate my learning experience, the bike I bought was previously owened by an older woman and her husband who, by all accounts, had just as much spare time as spare money. The consequence is that my bike has been thoroughly lavished by the aftermarket. I know, hell of a thing to complain about, right? Anyway, I find myself puzzling over a few bits and pieces of the bike, unsure as to their intended function or what, if anything, I need to do with them to maintain them. I have a Clymer manual for my bike, but was unable to find any specific reference to the parts shown in these pics. I'm hoping someone out there with more specialized knowledge can tell me what I'm looking at. (-: On a side note, please forgive the grunge. We're taking a 300 mile ride this weekend and we're supposed to get rain Thursday, so I've been putting off cleaning the bike until Friday.
First Pic:
Can anyone tell me what brand of air cleaner this is? I know it's not stock, and I assume it's a genuine Kawa Fire & Steel part because all the rest of the aftermarket is, but I couldn't find it in Kawa's online cataloge. I'd really like to get a new filter element in there.
Next:
This filter element I was unable to find in my Clymer. It's on the left-hand side of the bike, just ahead of the shift lever, and it's secured to a random hose with a zip-tie. The auto mechanic in me wants to call it either cold air intake (since it's away from the pipes) or some sort of PCV component. No idea though.
Next:
Okay, the white arrow in this image points to the hose coming off the back of the filter element shown above. The red arrow points to a knob of some sort that sticks down from behind the cleaner housing -- I assume it's attached to the carb. I read on another forum awhile ago something about a custom "remote adjustment" dongle that looks like this, but I don't recall what it's for adjusting. Again, the auto mechanic in me wants to assume it's for remotely adjusting the air/fuel, but I haven't messed with it at all. Here's another view of it:
Any input or ideas anyone can give me would be greatly appreciated. As always, I intend to 'pay it all back' in the future as I learn more and continue to contribute to this community. Thanx in advance. (-:
I mentioned in another post that I'm a fairly competent car mechanic, but that motorcycle mechanics are new to me. To further complicate my learning experience, the bike I bought was previously owened by an older woman and her husband who, by all accounts, had just as much spare time as spare money. The consequence is that my bike has been thoroughly lavished by the aftermarket. I know, hell of a thing to complain about, right? Anyway, I find myself puzzling over a few bits and pieces of the bike, unsure as to their intended function or what, if anything, I need to do with them to maintain them. I have a Clymer manual for my bike, but was unable to find any specific reference to the parts shown in these pics. I'm hoping someone out there with more specialized knowledge can tell me what I'm looking at. (-: On a side note, please forgive the grunge. We're taking a 300 mile ride this weekend and we're supposed to get rain Thursday, so I've been putting off cleaning the bike until Friday.
First Pic:
Can anyone tell me what brand of air cleaner this is? I know it's not stock, and I assume it's a genuine Kawa Fire & Steel part because all the rest of the aftermarket is, but I couldn't find it in Kawa's online cataloge. I'd really like to get a new filter element in there.
Next:
This filter element I was unable to find in my Clymer. It's on the left-hand side of the bike, just ahead of the shift lever, and it's secured to a random hose with a zip-tie. The auto mechanic in me wants to call it either cold air intake (since it's away from the pipes) or some sort of PCV component. No idea though.
Next:
Okay, the white arrow in this image points to the hose coming off the back of the filter element shown above. The red arrow points to a knob of some sort that sticks down from behind the cleaner housing -- I assume it's attached to the carb. I read on another forum awhile ago something about a custom "remote adjustment" dongle that looks like this, but I don't recall what it's for adjusting. Again, the auto mechanic in me wants to assume it's for remotely adjusting the air/fuel, but I haven't messed with it at all. Here's another view of it:
Any input or ideas anyone can give me would be greatly appreciated. As always, I intend to 'pay it all back' in the future as I learn more and continue to contribute to this community. Thanx in advance. (-:
- Jack of the Green
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
-
- Site Supporter - Gold
- Posts: 5285
- Joined: Wed Aug 16, 2006 1:46 pm
- Real Name: Ryan
- Sex: Male
- Years Riding: 4
- My Motorcycle: 2005 Kawasaki Z750S
- Location: Colorado Springs, CO
Re: A Fistfull of Questions
That's your crankcase breather. On the stock air box it's attached, but with the aftermarket air filter on there, they supplied a small filter just for it with no way to attach it to your new air box.
Have owned - 2001 Suzuki Volusia
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
- JackoftheGreen
- Moderator
- Posts: 1219
- Joined: Sat Apr 21, 2012 8:10 pm
- Real Name: Eric
- Sex: Male
- Years Riding: 12
- My Motorcycle: Versys 1000 LE "Gleep"
- Location: Northern Utah
- Contact:
Re: A Fistfull of Questions
Excellent! So I ought to be able to clean up that installation a little without affecting it's purpose? I'd like it to stand up straight rather than just laying on it's side like that.
- Jack of the Green
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
-
- Site Supporter - Gold
- Posts: 5285
- Joined: Wed Aug 16, 2006 1:46 pm
- Real Name: Ryan
- Sex: Male
- Years Riding: 4
- My Motorcycle: 2005 Kawasaki Z750S
- Location: Colorado Springs, CO
Re: A Fistfull of Questions
Oh yeah, without a doubt. Most people cut the hose down to minimum before installing that small filter. I assume whoever put it on wanted to leave it at that length in case they ever wanted to put the stock airbox back on.
Have owned - 2001 Suzuki Volusia
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
- fireguzzi
- Site Supporter - Bronze
- Posts: 2248
- Joined: Fri Aug 20, 2004 3:00 pm
- Real Name: Trevor
- Sex: Male
- Years Riding: 12
- My Motorcycle: dream bike (really, it's in my dreams)
- Location: Covington, Georgia
Re: A Fistfull of Questions
the adjuster is most likely an idle speed adjuster.
[img]http://i46.photobucket.com/albums/f101/fireguzzi/papabarsig.jpg[/img]
-
- Site Supporter - Silver
- Posts: 572
- Joined: Tue Sep 02, 2008 1:04 pm
- Real Name: Pete
- Sex: Male
- Years Riding: 10
- My Motorcycle: 1980 Suzuki GS550L, 2019 Zero DSR
- Location: Athens, NY
Re: A Fistfull of Questions
Those filters look like K&N Washable types... if not that specific branding...
2019 Zero DSR, 1980 Suzuki GS550L
-
- Site Supporter - Gold
- Posts: 5285
- Joined: Wed Aug 16, 2006 1:46 pm
- Real Name: Ryan
- Sex: Male
- Years Riding: 4
- My Motorcycle: 2005 Kawasaki Z750S
- Location: Colorado Springs, CO
Re: A Fistfull of Questions
Yup, I scanned and didn't see you asked about that lol. But definitely what FG says. For what it's worth, only adjust your idle speed when the bike is warmed up fully. Doing it any other time will result in some funky problems.fireguzzi wrote:the adjuster is most likely an idle speed adjuster.
Have owned - 2001 Suzuki Volusia
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
Current bike - 2005 Kawasaki Z750S
MMI Graduation date January 9th, 2009. Factory Certifications in Suzuki and Yamaha
- storysunfolding
- Moderator
- Posts: 3882
- Joined: Wed Sep 21, 2005 10:20 am
- Sex: Male
- Years Riding: 22
- My Motorcycle: Vstrom 650, S1000RR, XS850, ZX6R
- Location: Reston Virginia
Re: A Fistfull of Questions
My colleague that used to work for 20 years for motorcycle dealers (Aprilla, BMW, Ducati, Triumph, Kawasaki, Suzuki, Honda, Yamaha, Kymco- the last 7 all in one shop) stated that no OEM would offer an airfilter that's so easily open to infiltration from water and rocks (from the road) due to their warranty programs. So it's probably not Kawasaki.
- JackoftheGreen
- Moderator
- Posts: 1219
- Joined: Sat Apr 21, 2012 8:10 pm
- Real Name: Eric
- Sex: Male
- Years Riding: 12
- My Motorcycle: Versys 1000 LE "Gleep"
- Location: Northern Utah
- Contact:
Re: A Fistfull of Questions
Yaknow, I've been thinking about that exact thing. I'm sure this filter has taken more than it's share of abuse due to that exposed layout, and it looks like it's had a foot dragged across it at least once. If I can't identify it, I suppose the only way to get a new air filter is to buy a whole new intake.
- Jack of the Green
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
- JackoftheGreen
- Moderator
- Posts: 1219
- Joined: Sat Apr 21, 2012 8:10 pm
- Real Name: Eric
- Sex: Male
- Years Riding: 12
- My Motorcycle: Versys 1000 LE "Gleep"
- Location: Northern Utah
- Contact:
Re: A Fistfull of Questions
Just an update...
I pulled the breather off the bike and removed the filter, and found a K&N brand molded in the rubber along with the number H097A6. Local bike shops couldn't help me, even with that part number, but I called K&N directly and managed to get some answers. What I had was a mold number, which was helpful to nobody but the guy at K&N. He gave me a part number for the filter, E-3333, and now I can find the damn thing anywhere with that good number.
On a side note, that filter retails for $50-$60 brand new, but the guy at K&N offered me a discount. $28! How cool is that? So, I guess I don't have to buy a new intake, aww shucks. (-:
Another note, I did a little fabrication the other night and it turned out real well. I snagged a sheet aluminum panel that used to be part of my BBQ grill and took a pair of tin snips to it, cut out a teardrop shape some five inches across, then put a 90 degree bend in the narrow end and drilled a hole through both planes. One for a bolt, one for the bottom of that PCV filter we identified. I removed one of the radiator mounting bolts and attached my little bracket there, then put the filter base through the larger hole and connected the PCV hose beneath. It looks good -- not amazing, not chromed, but it sure looks better than having that thing laying over on it's side like in the pictures. Maybe I'll snap a shot of it and post, if anyone's interested in seeing the finished product.
I pulled the breather off the bike and removed the filter, and found a K&N brand molded in the rubber along with the number H097A6. Local bike shops couldn't help me, even with that part number, but I called K&N directly and managed to get some answers. What I had was a mold number, which was helpful to nobody but the guy at K&N. He gave me a part number for the filter, E-3333, and now I can find the damn thing anywhere with that good number.
On a side note, that filter retails for $50-$60 brand new, but the guy at K&N offered me a discount. $28! How cool is that? So, I guess I don't have to buy a new intake, aww shucks. (-:
Another note, I did a little fabrication the other night and it turned out real well. I snagged a sheet aluminum panel that used to be part of my BBQ grill and took a pair of tin snips to it, cut out a teardrop shape some five inches across, then put a 90 degree bend in the narrow end and drilled a hole through both planes. One for a bolt, one for the bottom of that PCV filter we identified. I removed one of the radiator mounting bolts and attached my little bracket there, then put the filter base through the larger hole and connected the PCV hose beneath. It looks good -- not amazing, not chromed, but it sure looks better than having that thing laying over on it's side like in the pictures. Maybe I'll snap a shot of it and post, if anyone's interested in seeing the finished product.
- Jack of the Green
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon
To Ride an Iron Horse - Jack of the Green's Blog
Some Awesome Threads:
The Riding Game - Photo Scavenger Hunt
Motorcycle Product Reviews - Staff and Member Reviews!
What Did You Do Today?
Social Media:
TMW on DailyMotion!
The TMW YouTube Channel!
TMW on Facebook!
Support the TMW Staff! Become a Patron today!
Patreon