rectifier shot - help!

Message
Author
pauly
Rookie
Rookie
Posts: 11
Joined: Sun May 22, 2005 11:58 pm
Sex: Male
Location: Melbourne, Australia

rectifier shot - help!

#1 Unread post by pauly »

OK i'm new to this internet forum thing so forgive any obvious mistakes
Here's my question.. the rectifier on my '71 yamaha R5 350 is gone and i'm told it'll cost loads to get a new one for an R5...(if i can get one!) Does anybody know of any short-cuts there are to get around the problem? - OR if a rectifier from another bike (eg. RD 350 or YDS7) will make a suitable replacement?

User avatar
Gummiente
Site Supporter - Platinum
Site Supporter - Platinum
Posts: 3485
Joined: Wed May 11, 2005 11:34 pm
Real Name: Mike
Sex: Male
Years Riding: 38
My Motorcycle: 03 Super Glide
Location: Kingston, ON

#2 Unread post by Gummiente »

Try asking these guys, they should be able to help you out:
RD Owners.

It'll cost big bucks to get a NEW rectifier for sure, but if there are any motorcycle wrecking yards in your area you can pick up a used one for much less. No guarantee it will work, though.
:canada: Mike :gummiente:
It isn't WHAT you ride,
It's THAT you ride

User avatar
cb360
Site Supporter - Gold
Site Supporter - Gold
Posts: 1196
Joined: Wed Mar 30, 2005 11:15 am
Sex: Male
Location: Seattle, Washington

#3 Unread post by cb360 »

I recently replaced a rectifier on a '74 cb360 and it worked out fine - $30 from a junk yard - I don't know your bike though - this guy might be able to help, I've read of several people who bought his aftermarket rectifiers and they love them.

http://www.oregonmotorcycleparts.com/
1974 Honda CB360
1985 Honda Magna VF700c

kar_the_terrible
Legendary
Legendary
Posts: 263
Joined: Wed Mar 16, 2005 6:35 am
Sex: Male
Location: Pittsburgh, PA

#4 Unread post by kar_the_terrible »

Rectifiers should be mostly interchangeable across most bikes. The only thing that could possibly be incompatible is the current rating and the mounts. Actually, given the compactness of modern silicon components, you can pretty much plug in any rectifier and it should work.

I read a post recently about a guy using a 30-40amp rectifier from radioshack. Before you replace it make sure how many diodes it has (On a yamaha this could be the number of white wires coming out of your rectifier) Normally they should have three diode rectifiers, then you can find a suitable replacement.

Alternatively, if youd like to spend a few more bucks, there's website that guarantees their electrical parts. I'll look it up and post back... in the mean time if this rings a bell in someone else's mind please post.
'78 Yamaha XS400
'86 Yamaha Radian

pauly
Rookie
Rookie
Posts: 11
Joined: Sun May 22, 2005 11:58 pm
Sex: Male
Location: Melbourne, Australia

rectifier problem

#5 Unread post by pauly »

Gee, i didn't expect so much help so soon. Thank you very much everyone! This website is cool!!
I'll have a look at the RD owners page for sure. I've already started to ring around wrecking yards in Australia and found one guy in another state who reckons he might have something but won't guarantee it's working condition...
I'm still ringing around. It seems to me that R5 parts are hard to come by down here. Most wreckers deal in more modern bike, or dirt bikes.
It's a real pain because my little yammy is my everyday bike. She ran great, that is, until now - still she's over 30 years old I guess. I'm keeping her though.
I'll get back to you all when i get a result.
Thanks again everyone.
:D

User avatar
cb360
Site Supporter - Gold
Site Supporter - Gold
Posts: 1196
Joined: Wed Mar 30, 2005 11:15 am
Sex: Male
Location: Seattle, Washington

#6 Unread post by cb360 »

http://www.bent-bike.com/

You can check these guys too - I think they ship overseas. They have buckets of used rectifiers for $30US. The search function on their site stinks - if you use them, just email what you are looking for.
1974 Honda CB360
1985 Honda Magna VF700c

pauly
Rookie
Rookie
Posts: 11
Joined: Sun May 22, 2005 11:58 pm
Sex: Male
Location: Melbourne, Australia

rectifier update

#7 Unread post by pauly »

Well, it seems that my problem has been solved, and i'd like to say thanks very much to those of you who responded to my request for help.
After much searching on the web and in the phone book, i was flickling thru the back pages classified ads in a local bike mag and found a possible solution. I rang the guy up, he runs a wrecking service from his home, and he proved quite knowledgable about all things yamaha (mostly old stuff, which suits me fine) he said he had a rectifier and could guarantee that it worked. So i had him C.O.D. it to me and now it's in the hands of my mechanic. I know i should prob'ly fit it myself but i'm not that advanced in knowledge or skills (maybe one day, eh?) Hopefully i'll be back on the road in a couple of days. Anyway, i'm just stoked to know that there's so much support and interest online for people like me to access. Thanks again. :D :D :D

pauly
Rookie
Rookie
Posts: 11
Joined: Sun May 22, 2005 11:58 pm
Sex: Male
Location: Melbourne, Australia

rectifier/electrical problem

#8 Unread post by pauly »

Nope it ain't the rectifier coz i replaced and the problem still occured. The battery charges up fine and reads 11.7 volts, but it won't hold the charge for more than 20-30 mins. My suspicion is that the battery is finished, especially if it was receiving 200 volts thru it while the rectifier was not functioning. My local mechanic has been instructed to try another battery and i'm waiting to hear the result. I'll keep yuz posted. :?

User avatar
cb360
Site Supporter - Gold
Site Supporter - Gold
Posts: 1196
Joined: Wed Mar 30, 2005 11:15 am
Sex: Male
Location: Seattle, Washington

#9 Unread post by cb360 »

11.7 volts doesn't sound like a fully charges battery to me. Could be the battery is shot.
1974 Honda CB360
1985 Honda Magna VF700c

pauly
Rookie
Rookie
Posts: 11
Joined: Sun May 22, 2005 11:58 pm
Sex: Male
Location: Melbourne, Australia

rectifier fixed - problem still occuring

#10 Unread post by pauly »

I've replaced the battery and the problem still happens. The new, fully charged, battery runs down in about 20-30 minutes. The mechanic says the system seems fine (i'm gonna use a diff'rent mechanic I reckon). Somebody has suggested that the alternator may not be putting out enough voltage/current to charge the battery. Is this a big fix?, or cheaper to replace? Any thoughts welcome.
Shall report again.

Post Reply