1982 xj 650 starting problems

Message

grayeagle · #1 Unread post by **grayeagle** » Sat Oct 25, 2008 7:28 am

Hi all,
I'm new here & have a 1981 xj 650 maxim. I have a cold starting problem. When I try & start it after its been sitting overnite is when the problem occurs. When I push the starter button sometimes it will not do anything,after pushing it again it will engage the starter but its very slow turning, then sometimes it spins fast like it should. The battery checks good, and after warming it will start with just a touch of the starter button. I'm not a mechanic & it is driving me nuts, any help would be greatly appriciated, I've checked all connections & they seem o.k. I'm really getting to the point of screaming.......help please????? & thanks in advance.
grayeagle

Johnj · #2 Unread post by **Johnj** » Sat Oct 25, 2008 8:07 am

I think your starter solenoid is going bad. Or maybe the starter button has corrosion on it. Check all the electrical connectors for corrosion.

grayeagle · #3 Unread post by **grayeagle** » Sat Oct 25, 2008 1:59 pm

thanks johnj,
I'll clean all connections & a solonoid if that doesn't work.
again, thanks a bunch,nice to hear from someone so fast
grayeagle

mydlyfkryzis · Sat Oct 25, 2008 3:19 pm

Also, the brushes in the starter motor may be worn. that is common on older bikes.

grayeagle · #5 Unread post by **grayeagle** » Sat Oct 25, 2008 3:36 pm

thanks for the advise, I'll check brushes on starter also. thanks for the advise, I really appriciate you guys!!
grayeagle

Johnj · #6 Unread post by **Johnj** » Sat Oct 25, 2008 7:00 pm

Sometimes that kind of thing just happens with older bikes. It becomes part of the character of that bike.