Helmet De-fog Products?
- KarateChick
- Site Supporter - Gold
- Posts: 1083
- Joined: Wed Aug 10, 2005 4:27 pm
- Sex: Male
- Location: 53°28' N 113° 35' W, Alberta
Helmet De-fog Products?
It's getting noticeably cooler here...I was wondering if anyone has suggestions for products to use on the face visor to eliminate or reduce fogging that won't ruin the plastic? I wear a full face helmet.
I have been riding at times with the shield open about 1/2 inch (the next increment seems to fully close it) but that gets rather windy and quite noisy. I found with the shield closed, it is fine while riding but as soon as I stop at a light or such, it starts to fog. Also, any negatives with regard to riding sometimes with the shield slightly open?
Thanks!
I have been riding at times with the shield open about 1/2 inch (the next increment seems to fully close it) but that gets rather windy and quite noisy. I found with the shield closed, it is fine while riding but as soon as I stop at a light or such, it starts to fog. Also, any negatives with regard to riding sometimes with the shield slightly open?
Thanks!
Ya right,
there are only 2 kinds of bikes: It's a Ninja... look that one's a Harley... oh there's a Ninja... Harley...Ninja...
[img]http://i79.photobucket.com/albums/j135/KarateChick_2006/IMG_1245_1.jpg[/img]
[img]http://i79.photobucket.com/albums/j135/KarateChick_2006/IMG_1245_1.jpg[/img]
You might want to get a breath guard. That's what I use to fix the same problem. One of my HJC's came with one that's just a nose piece that clips on the helmet, preventing the warm air to rise above it.
My other helmet has a full piece of leather/foam that wraps around your mouth and nose and plugs into the vent holes of the helmet. The air you breathe goes through those vents instead of up to the helmet. This works very nice for extremely cold weather, because it actually helps heat your head up when you breathe. This has worked for me all the way down into the 10's F.
I would just go to the bike shop and see what they have for your specific helmet.
My other helmet has a full piece of leather/foam that wraps around your mouth and nose and plugs into the vent holes of the helmet. The air you breathe goes through those vents instead of up to the helmet. This works very nice for extremely cold weather, because it actually helps heat your head up when you breathe. This has worked for me all the way down into the 10's F.
I would just go to the bike shop and see what they have for your specific helmet.
Brian
'03 Suzuki SV1000
'03 Suzuki SV1000
- dr_bar
- Site Supporter - Diamond
- Posts: 4531
- Joined: Mon May 23, 2005 4:37 am
- Real Name: Doug
- Sex: Male
- Years Riding: 44
- My Motorcycle: 2007 Yamaha Royal Star Venture
- Location: Surrey BC, Canada
My friend, (blues2cruise) has a fog shield on her helmet. I don't know what brand but here is a link to a company that makes "Fog City Shields".
http://tinyurl.com/azn6d
This product is a stick on liner the adheres to the inside of your shield. It put a barrier between your breath and the shield itself and prevents fogging. Maybe she will post in here and give a review on the product...
http://tinyurl.com/azn6d
This product is a stick on liner the adheres to the inside of your shield. It put a barrier between your breath and the shield itself and prevents fogging. Maybe she will post in here and give a review on the product...

~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Four wheels move the body.
Two wheels move the soul!"
"Four wheels move the body.
Two wheels move the soul!"
- Skier
- Site Supporter - Platinum
- Posts: 2242
- Joined: Sat Aug 07, 2004 10:44 am
- Sex: Male
- Location: Pullman, WA, USA
My favorite trick for this is shaving cream. Get the cheapest stuff to make sure it has no weird chemicals in it (I use Barbasol).
Clean your shield, inside and out and let it dry. Then, put a layer of cream over over the inside and let it dry, preferably overnight. Lightly buff the cream out the next morning with a terry cloth (or washcloth).
Keeps it almost totally fog-free for a week or two, sometimes more.
Clean your shield, inside and out and let it dry. Then, put a layer of cream over over the inside and let it dry, preferably overnight. Lightly buff the cream out the next morning with a terry cloth (or washcloth).
Keeps it almost totally fog-free for a week or two, sometimes more.
[url=http://www.motoblag.com/blag/]Practicing the dark and forgotten art of using turn signals since '98.[/url]
Does it smell like it for those two weeks? I don't know if I'd like that.Skier wrote:My favorite trick for this is shaving cream. Get the cheapest stuff to make sure it has no weird chemicals in it (I use Barbasol).
Clean your shield, inside and out and let it dry. Then, put a layer of cream over over the inside and let it dry, preferably overnight. Lightly buff the cream out the next morning with a terry cloth (or washcloth).
Keeps it almost totally fog-free for a week or two, sometimes more.
Brian
'03 Suzuki SV1000
'03 Suzuki SV1000
- Skier
- Site Supporter - Platinum
- Posts: 2242
- Joined: Sat Aug 07, 2004 10:44 am
- Sex: Male
- Location: Pullman, WA, USA
It does smell of shaving cream for the first few days, but it goes away. I kinda like it, but not all my screws are tight in the ol' noggin'...Itzamna wrote:Does it smell like it for those two weeks? I don't know if I'd like that.Skier wrote:My favorite trick for this is shaving cream. Get the cheapest stuff to make sure it has no weird chemicals in it (I use Barbasol).
Clean your shield, inside and out and let it dry. Then, put a layer of cream over over the inside and let it dry, preferably overnight. Lightly buff the cream out the next morning with a terry cloth (or washcloth).
Keeps it almost totally fog-free for a week or two, sometimes more.

[url=http://www.motoblag.com/blag/]Practicing the dark and forgotten art of using turn signals since '98.[/url]
-
- Moderator
- Posts: 10182
- Joined: Fri Apr 22, 2005 4:28 pm
- Sex: Female
- Years Riding: 16
- My Motorcycle: 2000 Yamaha V-Star 1100
- Location: Vancouver, British Columbia
Well, I never did try shaving cream, but I tried 2 kinds of anti fog spray for glasses, anti fog window cleaner, "Sea Drops" froma dive shop that scuba divers us for their masks....NONE OF THEM WORKED.
I finally bought a "ProGrip" no fog lens which is basically the same thing as Fog City ( my local bike store was out of fog city so I bought the ProGrip brand)
It works GREAT!!!
I finally bought a "ProGrip" no fog lens which is basically the same thing as Fog City ( my local bike store was out of fog city so I bought the ProGrip brand)
It works GREAT!!!