Ninja 250 rear end Mod.

Message

WheelieGrip · #1 Post by **WheelieGrip** » Mon May 15, 2006 3:33 pm

I was looking at the rear end of my ninja 250 today and I hate the look of that chunk of plastic on the rear...Anyone who owns one of these ninja 250 knows what im talking about...The license plate atatches to it...I don't like it and want to take it off, If I do I will buy some new blinkers for it that match the front ones...(front ones are aftermarket)Because the rear blinkers are attached to this peice of plastic. So I was wondering if anyone here has ever taken off that ugly thing on the rear and where would I attach my license plate if I did this? Thanks

dieziege · #2 Post by **dieziege** » Mon May 15, 2006 3:48 pm

A lot of people take them off (not here necessarily) and usually people make a bracket out of some hardware store metal and attach both the license and the turn signal pods. Also, there is a plastic plate in the bottom of the tail light that can be removed and replaced with clear plastic (e.g. from a CD jewel case) to light the plate.

WheelieGrip · #3 Post by **WheelieGrip** » Mon May 15, 2006 3:52 pm

I guess I will look into it...Do you think its a do it yourself one?

dieziege · #4 Post by **dieziege** » Mon May 15, 2006 4:03 pm

Yep.

http://www.1opossum.com/vehicles/ninja/ ... /main.html

guitar guru · #5 Post by **guitar guru** » Mon May 15, 2006 5:12 pm

Alternately, you can do the same thing as the previous owner of my 88 ninja and saw off as much as you can without affecting the signals and plate. It looks better than stock since most of the sawed off part is behind the license plate.

#6 Post by **KarateChick** » Mon May 15, 2006 6:03 pm

Check out this site - these guys seem to like doing lots of mods to their 250's and there's a bunch of pics too. Just search your topic

http://forums.ninja250.org/

snwbrdr · #7 Post by **snwbrdr** » Tue May 16, 2006 8:08 am

Im working on doing this to my bike right now. im am actually in the process ofworking on it this minute. here's how to do it....

[img]C:\Documents%20and%20Settings\Jacob%20Soter\My%20Documents\DSCN1059.JPG[/img]
first what do you think about being naked?

[img]C:\Documents%20and%20Settings\Jacob%20Soter\My%20Documents\FSCN1065.JPG[/img]

heres the butt of your bike. if you notice my rear signals are gone. they are there you just dont no it yet. see the spaces either side of the tailight, yup the two little red squares on your bike are empty now. go buy some light sockets (3/4 inch) and use the wires from your current signals to hook them up.

[img]C:\Documents%20and%20Settings\Jacob%20Soter\My%20Documents\DSCN1064.JPG[/img]
these are on the bottom inside of the stupid black thing. my plan is to take it out and use the to mount a piece of stainless 7x9.5. i havent thought much about the license plate, but for the light im gonna put a hole in the bottom of said stainless and mount a light there. plate will b nearby of course.

snwbrdr · #8 Post by **snwbrdr** » Tue May 16, 2006 8:10 am

why didnt my pics work!?

dieziege · #9 Post by **dieziege** » Tue May 16, 2006 8:14 am

You need to upload your pics to a sever somewhere... your image links are local to files on your hard drive... you can see those but we cant.

I think there is a photo gallery here on TMW.... not sure how it works....

snwbrdr · #10 Post by **snwbrdr** » Tue May 16, 2006 8:47 am

okay, so ignore my first post. the back of your bike has three spaces for lights, but only the middleone has one. so get some 3/4 inch light sockets and rewire your signals to them. put them in these spaces next to the brake light. im gonna get some stainless steel 7x9.5 that will cover the hole created by the black piece being gone. ill drill holes and reinsert the screws that kept the black piece on there. the license plate is already on a bit of a frame take the whole thing off the black piece and bend it so it makes the license plate face right. screw this to the new stainless piece. drill a hole in the stainless and insert the light from the black piece. im not quite done, but i think its gonna work.
anymore questions just ask.