Page 1 of 1
Does ANYONE make inexpensive ignition coils???
Posted: Tue Sep 12, 2006 1:48 am
by Andy G
I need a new ignition coil for a 1978 Honda CB400TII Hawk. Mine still works, but when it gets hot it cuts out.
Cheapest I have found is around 100-125 bucks. I only paid 300 for the motorcycle...! Doesn't anyone make something less expensive???
Thanks!
Andy
Posted: Tue Sep 12, 2006 9:29 am
by flynrider
Check around the Internet for an Accel coil that will fit. Accels are usually priced lower than the Dyna coils and will do fine on your 400. I've seen Accels from around $75-$95.
Posted: Wed Sep 13, 2006 2:31 am
by roscowgo
spent 180$ on the two that go on my bike when i had to replace em.
Posted: Wed Sep 13, 2006 11:48 am
by oldschoolorange
how many leads does the coil have 1 or 2? I have bought single lead coils for about 40.00 cnd, If you are really tight for cahs buy a used one
Posted: Thu Sep 14, 2006 6:19 am
by koconno2
I found a new stator by Electrix for my 81 CX650 through them. First go to Electrex.com and check to see if they make what you need. Then buy at one of their dealers.
Posted: Sun Oct 01, 2006 2:59 pm
by giantrobot
The JCWhitney coils are decent replacements.
http://www.jcwhitney.com
Call your local parts shop. They should have inexpensive replacements.