Changing oil soon, quick query

Message
Author
User avatar
Falkenheld
Veteran
Veteran
Posts: 62
Joined: Fri Jun 09, 2006 8:25 am
Sex: Male
Location: Niagara, Canada

Changing oil soon, quick query

#1 Unread post by Falkenheld »

I've been using Quaker motor oil in my bike, and I've performed two oil changes so far. I have reached the time where another oil change should happen, but before I go off and buy Quaker again I was wondering if it would be okay if I used a different brand - one made specifically for motorcycles.

I read that one should use the same oil as before, but I have no idea what oil the prior owner of my bike used and at the time when I did that first oil change I was in a hurry to get some new oil (long story regarding long-term storage),and I just grabbed what seemed best at Canadian Tire.

Opinions?
[b]1980 Honda CB400T[/b]

User avatar
sharpmagna
Legendary 750
Legendary 750
Posts: 989
Joined: Fri May 26, 2006 12:02 pm
Sex: Male
Location: Hoodbridge, Virginia

#2 Unread post by sharpmagna »

I'm a newb so I just use motorcycle specific oil versus car oil. I've "heard" bad things may happen if you don't use the correct type of oil so I figure I'd play it safe. My bike has a wet clutch with the transmission oil being the same as the engine oil so I have to use the recommended oil or risk having some slippage in the clutch.

I think as long as you stick with the correct type and weight of oil that is recommended for your bike, then you should be ok. I'm not sure if it goes for bikes, but I know for cars you should switch back and forth between synthetic oil and I hear you shouldn't use synthetics on older vehicles.
1987 Honda <B>SUPER</B> Magna
[i]Bikesexual - I like to ride it long and hard...[/i]

User avatar
jonnythan
Legendary 2000
Legendary 2000
Posts: 2470
Joined: Tue Jun 20, 2006 8:08 am
Sex: Male
My Motorcycle: Year/Make/Model

#3 Unread post by jonnythan »

Make sure that the oil you're putting into your bike meets the requirements set forth in the manual. As it turns out, there's more to an oil than just its viscosity. If you bought 10W-30, you may as well throw it away because it has that "Energy conserving" label which means it'll wreak havoc on your clutch.

Your manual will tell you the grade of oil you need to use, so go by that.
[url=http://www.flickr.com/photos/jonnythan/sets/]Flickr.[/url]

MotoF150
Legendary 750
Legendary 750
Posts: 910
Joined: Sat Apr 15, 2006 11:01 pm

#4 Unread post by MotoF150 »

go to www.amsoil.com and read the " White Pages Of Motorcycle Oil" Its explained the difference between automotive and motorcycle motor oil
2011 Toyota Tacoma 4x4, 09 Yamaha Tmax, 08 Suzuki King Quad 750

User avatar
Gummiente
Site Supporter - Platinum
Site Supporter - Platinum
Posts: 3485
Joined: Wed May 11, 2005 11:34 pm
Real Name: Mike
Sex: Male
Years Riding: 38
My Motorcycle: 03 Super Glide
Location: Kingston, ON

Re: Changing oil soon, quick query

#5 Unread post by Gummiente »

Falkenheld wrote:but before I go off and buy Quaker again I was wondering if it would be okay if I used a different brand - one made specifically for motorcycles.
Canadian Tire usually carries 10W40 Castrol Motorcycle Oil, which is what you should be using in that bike. Look in the Motorcycle/ATV Accessories section, as they normally stock it there and not with all the other automotive oils.

Speaking of which, you should never use oils designed for cars as they have friction reducers that will fry your motorcycle's clutch. A car has separate oils for its engine and transmission and uses what is called a "dry clutch", which means it does not run in oil. A motorcycle like yours uses the same oil in the engine, transmission and "wet clutch" and therefore must use oil designed for motorcycles.
:canada: Mike :gummiente:
It isn't WHAT you ride,
It's THAT you ride

User avatar
Britjoe
Legendary
Legendary
Posts: 268
Joined: Sun May 01, 2005 2:19 pm
Sex: Male
Location: Calgary

#6 Unread post by Britjoe »

The reason for using Motorcycle oil is because of the friction modifyers they use in car oil, will make your wet clutch slip,

Post Reply