Page 1 of 1
valve clearences question
Posted: Wed Jul 06, 2011 4:18 am
by steveh
Is there any order in which to check the valve clearances on a suzuki gsx 750 f 2000
Thanks
Re: valve clearences question
Posted: Wed Jul 06, 2011 5:56 am
by HYPERR
Usually on an inline 4, the normal order is:
1. #1 & #3 intake
2. #2 & #4 exhaust
3. #2 & #4 intake
4. #1 & #3 exhaust
Nothing written in stone but this order makes the most sense since you turn the crankshaft 180 degrees after aligning the T mark to check the #1 & #3 intake to start.
Re: valve clearences question
Posted: Wed Jul 06, 2011 6:42 am
by steveh
Many thanks....will try
Re: valve clearences question
Posted: Wed Jul 06, 2011 9:04 am
by HYPERR
Do you have a shop manual for your bike?
Re: valve clearences question
Posted: Wed Jul 06, 2011 9:10 am
by totalmotorcycle
Welcome Steve to the community! Good to see you have already had some helpful advice. Feel free to help others on here too.
Mike