Best flat repair kit?
- Grey Thumper
- Legendary 1000
- Posts: 1434
- Joined: Wed Apr 25, 2007 11:21 pm
- Real Name: Dino
- Sex: Male
- Years Riding: 9
- My Motorcycle: 2004 BMW R1150Rockster, 2015 BMW R1200GS
- Location: Manila, Philippines
Best flat repair kit?
Hi all. I'm starting to take longer rides and am thinking of supplementing my kit (CO2 cartridges, glue, tire plugs). What's your preferred kind of flat repair kit? I was thinking of getting fix-a-flat or something similar, since it seems more newb friendly (ie, idiotproof) than using tire plugs.
"If you ride like there's no tomorrow, there won't be."
- Scoutmedic
- Site Supporter - Gold
- Posts: 1627
- Joined: Wed May 18, 2005 9:05 am
- Real Name: Barry
- Sex: Male
- Years Riding: 7
- My Motorcycle: 2003 Honda Gold Wing
- Location: Corry, Pennsylvania
Make absolutely sure you tell the mechanic that works on the tire after using fix-a-flat that it's in there.
My cousin, a mechanic, almost died and still has ongoing medical problems because of fix-a-flat; A guy used it to keep his tire inflated until he could get it fixed. He stopped at my family's service station and Bob began to repair the tire. When he ran a reemer to clear the hole, it sparked on the steel wire of the tire and the mixture exploded. The explosion was heard over 1/2 mile away. This is the reason that fix-a-flat has the warnings on it that it does today. The original formula used Butane for the accelerant.
If a tire is going to be repaired or even removed from the rim and replaced after having fix-a-flat, it MUST be purged. Have them deflate the tire, inflate the tire and deflate the tire (at least one purge cycle) before beginning repairs or replacement.
My cousin, a mechanic, almost died and still has ongoing medical problems because of fix-a-flat; A guy used it to keep his tire inflated until he could get it fixed. He stopped at my family's service station and Bob began to repair the tire. When he ran a reemer to clear the hole, it sparked on the steel wire of the tire and the mixture exploded. The explosion was heard over 1/2 mile away. This is the reason that fix-a-flat has the warnings on it that it does today. The original formula used Butane for the accelerant.
If a tire is going to be repaired or even removed from the rim and replaced after having fix-a-flat, it MUST be purged. Have them deflate the tire, inflate the tire and deflate the tire (at least one purge cycle) before beginning repairs or replacement.
- storysunfolding
- Moderator
- Posts: 3882
- Joined: Wed Sep 21, 2005 10:20 am
- Sex: Male
- Years Riding: 22
- My Motorcycle: Vstrom 650, S1000RR, XS850, ZX6R
- Location: Reston Virginia
CO2 cartridges never seem to have enough and if you have a slow leak that you can't plug, you're screwed.
I like the kits and pumps available here http://motopumps.com/
I bought his pump b/c the slime pump was apparently a few months away from hitting the market. However, his pump was small enough to fit in with my toolkit and does a great job.
I like the kits and pumps available here http://motopumps.com/
I bought his pump b/c the slime pump was apparently a few months away from hitting the market. However, his pump was small enough to fit in with my toolkit and does a great job.
- flynrider
- Site Supporter - Platinum
- Posts: 2391
- Joined: Thu Jul 21, 2005 1:36 pm
- Sex: Male
- Years Riding: 30
- My Motorcycle: '93 Honda Nighthawk 750
- Location: Phoenix, AZ
Fix-a-flat has not used flammable propellents for a long time. There are no longer warnings on the can.Scoutmedic wrote: This is the reason that fix-a-flat has the warnings on it that it does today. The original formula used Butane for the accelerant.
If you're going to use an aerosol inflator, read the label. There are still a few cheap off-brand types that use butane propellants. It's best to avoid those altogether. Not only can the endanger maintenance folks, but they could also ignite on the bike in certain accident scenarios.
Bikin' John
'93 Honda CB750 Nighthawk
'93 Honda CB750 Nighthawk
- Scoutmedic
- Site Supporter - Gold
- Posts: 1627
- Joined: Wed May 18, 2005 9:05 am
- Real Name: Barry
- Sex: Male
- Years Riding: 7
- My Motorcycle: 2003 Honda Gold Wing
- Location: Corry, Pennsylvania
Cool. I wasn't aware of that. I obviously haven't used any personally since my cousin's accident.flynrider wrote: Fix-a-flat has not used flammable propellents for a long time. There are no longer warnings on the can.
If you're going to use an aerosol inflator, read the label. There are still a few cheap off-brand types that use butane propellants. It's best to avoid those altogether. Not only can the endanger maintenance folks, but they could also ignite on the bike in certain accident scenarios.
Those other kits look pretty cool. Those small air compressors really work eh?
- Skier
- Site Supporter - Platinum
- Posts: 2242
- Joined: Sat Aug 07, 2004 10:44 am
- Sex: Male
- Location: Pullman, WA, USA
That kit looks like a great deal. It's everything from the WalMart tire repair section but cheaper than buying it all yourself!storysunfolding wrote:CO2 cartridges never seem to have enough and if you have a slow leak that you can't plug, you're screwed.
I like the kits and pumps available here http://motopumps.com/
I bought his pump b/c the slime pump was apparently a few months away from hitting the market. However, his pump was small enough to fit in with my toolkit and does a great job.

[url=http://www.motoblag.com/blag/]Practicing the dark and forgotten art of using turn signals since '98.[/url]
- storysunfolding
- Moderator
- Posts: 3882
- Joined: Wed Sep 21, 2005 10:20 am
- Sex: Male
- Years Riding: 22
- My Motorcycle: Vstrom 650, S1000RR, XS850, ZX6R
- Location: Reston Virginia