Back to 2000 Yamaha Motorcycle Index Page
Click photo to enlarge.
It makes a great desktop image.
2000 Yamaha YZF-R6
2000 Yamaha YZF-R6
2000 Yamaha YZF-R6
2000 Yamaha YZF-R6
2000 Yamaha YZF-R6
– 2000 Yamaha YZF-R6
The blur of the asphalt is highlighted by the single broken line which now appears solid. The wind screams around you as you cut through it like an aerodynamic experiment in perfect harmony with your bike. You are in control while all around you appears chaos.
For you there is no greater thrill than the ultimate in technological performance. The supreme combination of power, agility and adrenaline. In short, THE RUSH!
The perfection of performance is always just around the next corner; ride a Yamaha and you’re sure to have the inside track every time.
Specifications:
Model Information YZF-R6M (USA)
YZF-R6MC (California)
Weight 373 lbs (dry)
415 lbs (wet)
Engine Type Liquid-cooled, 4 stroke, DOHC
Piston Arrangement In-line 4
Displacement 599cc
Horsepower 120bhp @ 13,000rpm
Torque 68.1 ft.lbs.
Power to Weight Ratio 0.289 hp/lb wet
0.321 hp/lb dry
Bore and Stroke 65.5 x 44.5 mm
Redline 15,500 rpm
Carburation 37mm Keihin
Compression Ratio 12.4:1
Oil Capacity 3.70 qts
Fuel Capacity 4.49 gal
0.93 gal reserve
Radiator Capacity 2.27 qts
Primary Gears 86/44 (1.955)
Secondary Gears 48/16 (3.00)
Chain Size 532, 116 links
Clutch Friction Plates 8
Clutch Steel Plates 7
Clutch Springs 6
Wheel Base 54.4″
Overall Length 79.7″
Overall Width 27.2″
Overall Height 43.5″
Seat Height 32.3″
Lean Angle .
Ground Clearance 5.3″
Rake 24 degrees
Trail 81 mm
Swingarm Length 566 mm
Front Fork 43mm Diameter
Front Spring Rate 42.8 lbs
Rear Spring Rate 543 lbs.
Front Wheel Travel 5.12″
Rear Wheel Travel .
Front Wheel 17×3.50 Aluminium 3-spoke
Front Tire 120/60ZR-17
Rear Wheel 17X5.50 Aluminium 3-spoke
Rear Tire 180/55ZR-17
Front Caliper 2-pot per side
Front Disc 298×5 mm per side
Rear Caliper 1-pot
Rear Disc 220×5 mm
Specifications are subject to change without notice, in accordance with national regulation and legislations
Be the first to comment