2009 Aprilia Shiver 750 GT

You are here: Home2009 Models — 2009 Aprilia Motorcycle Models

2009 Aprilia Shiver 750 GT
Back to 2009 Aprilia Motorcycle Index Page

Click photos to enlarge.
They make great desktop images.

2009 Aprilia Shiver 750 GT
2009 Aprilia Shiver 750 GT

2009 Aprilia Shiver 750 GT
2009 Aprilia Shiver 750 GT

2009 Aprilia Shiver 750 GT
2009 Aprilia Shiver 750 GT

2009 Aprilia Shiver 750 GT
2009 Aprilia Shiver 750 GT


– 2009 Aprilia Shiver 750 GT

2009 Aprilia Shiver 750 GT

INNOVATIVE, VERSATILE, SPORTY, COMFORTABLE. THE APRILIA SHIVER 750 GT ENTERS THE WORLD OF HALF-FAIRING SPORTS TOURING BIKES WITH THE INTENTION OF STEALING THE SHOW. WITH AN UNPARALLELED TECHNOLOGICAL DESIGN, THE SHIVER 750 GT HAS NO RIVALS IN ITS CATEGORY, AND CAN SATISFY THE REQUIREMENTS OF EVEN THE MOST DEMANDING MOTORCYCLIST.

Aprilia Shiver 750 GT and ABS

The Aprilia Shiver 750, the most innovative and technically advanced naked around, is now entering the sport touring segment in a brand new GT version. A torquey and superbly practical V twin engine, plus excellent weather protection and a superb chassis are just some of the distinctive elements of the new Aprilia Shiver 750 GT. Fully integrated, ride by wire electronic throttle control, three performance mappings (Sport, Touring and Rain) and radial brakes are all-new features for the sport touring sector and make the Aprilia Shiver 750 GT a uniquely prestigious machine. The enhanced wind protection afforded by the new half fairing adds significantly to the range of action of the Shiver 750 GT, turning it into a ‘total’ motorcycle, capable of satisfying all riding needs from everyday commuting to summer touring. The Shiver 750 GT will thrill even the most demanding riders by turning every ride into a gratifying, intuitive, enjoyable and safe experience. For maximum active safety under all riding conditions, the Shiver and the Shiver GT are now also available with ABS.

After bringing a breath of fresh air to the naked bike category, with Shiver Aprilia raises the technological bar once again in the sports touring segment with the Shiver 750 GT, an innovative Sports Tourer, the perfect combination of sports handling, versatility and value in true Aprilia style.

A two-cylinder engine with almost limitless torque, comfortable for two, excellent aerodynamic protection and a chassis that has become a benchmark, are just some of the distinctive features of the Aprilia Shiver 750 GT which, thanks to its dynamic and technological characteristics, is without a doubt a point of reference of the segment, proving once again that Aprilia has what it takes to offer even the most demanding motorcyclists exactly what they want, also with a high technological content.

The equipment of the bike brings the technical level of the segment to new heights, with Aprilia’s offer far above that of its competitors. The integral Ride by Wire accelerator, the mapping management controlled by the rider (Sport, Touring and Rain), and the brakes with radial calipers, are truly unique solutions for the sports touring segment and make the Aprilia Shiver 750 GT a sophisticated bike, and a real one-of-a-kind.

The half-fairing gives the Shiver 750 GT the chance to exploit the full versatility of its Naked sister. The added aerodynamic protection in fact, expands the range of use of the Shiver 750 GT notably, making it a “all-round” bike with a complete range of use. From daily commuting, to a trip in the summer, the Shiver 750 GT will meet your needs to perfection, making your rides a pleasure – intuitive, brilliant and safe.

The main characteristics of the Aprilia Shiver 750 GT are:

” 90° V2 engine with four valves per cylinder, double overhead camshaft and liquid cooling;
” ride-by-wire electronic throttle technology with 3 different mappings (Sport, Touring and Rain);
” electronic fuel injection with latest generation injectors;
” mixed gear and chain valve timing;
” modular steel trellis and aluminium side plate frame for high torsional rigidity;
” aluminium swingarm with reinforcement truss and lateral shock absorber;
” 43 mm upside down fork;
” brakes with radial caliper at front;
” latest generation two channel ABS (ABS version only);

The Aprilia Shiver 750 GT comes with the same sophisticated technical package as the Shiver, except for the engine which is a modern 90° V-twin – Euro 3. This engine, the first every mass-produced engine to use the integral Ride By Wire system, made its mark immediately thanks to its dynamic characteristics. Delivering 95 HP, it is not only the most powerful twin in its category; the engine also has a torque curve which comes in right from low revs making the bike competitive even with bikes fitted with bigger engines, as far as pulling power goes.

The perfect engine for this type of bike, its full and brilliant delivery are just what the rider of the Aprilia Shiver 750 GT is looking for from a bike that offers not only the very best performance, but which is also easy and intuitive to ride, with the wide torque band notably reducing the need to change gear even when fully laden.

What’s more, the rider can choose between three mapping setups (Sport, Touring, Rain) to always have the ideal power delivery for the current road conditions and their own particular riding style.
This is where the innovation that only the Aprilia engineers could apply first comes into play, the generous power and torque of the V2 are filtered by the Ride-by-Wire system for the best possible power delivery for all type of motorcyclists in every possible condition. With the Sport mapping setting, the behaviour of the engine is the thrilling sports performance of the Aprilia twin. The Touring setting gives you a softer power delivery for those relaxing moments when sports performance is set aside for the pleasures of touring, using more of the engine’s torque. Finally, the Rain Map, which reduces the torque delivered by 25%, helps the riders avoid spinning the rear wheel when starting on slippery roads.

The sophisticated chassis of the Shiver 750 GT sets the standard for the competition. A composite-type frame (steel trellis and aluminium side members) designed to work in perfect symbiosis with the 43 mm upside down fork and the strong aluminium swingarm with reinforcement truss. The adjustable laterally mounted monoshock is another characteristic mark of the Aprilia Shiver 750 GT. Its position leaves ample room for the exhaust under the seat, which means a very linear exhaust system with an optimal volumetric design to bring the very best out of the engine.

The first class chassis couldn’t be complete without top class brakes. Radial calipers act on 320 mm discs, and the ABS version is also equipped with a sophisticated 2-channel ABS system to bring riding safety to the very highest levels.




 

2009 Aprilia Shiver 750 GT – Press Release Specifications

Engine
Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder.
Fuel Unleaded petrol.
Bore x stroke 92 x 56.4 mm
Total displacement 749.9 cc
Compression ratio 11 : 1
Maximum power at the crank 95 HP at 9000 rpm.
Maximum torque at the crank 8.25 kgm at 7000 rpm.
Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies and Tri-Map mapping setting

Ignition
Digital electronic, integrated with the injection
Starting Electric

Exhaust
Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe

Generator 450 W at 6000 rpm.

Lubrication Wet sump

Gearbox six speed, transmission ratio:
1st 36/14 (2.57)
2nd 32/17 (1.88)
3rd 30/20 (1.5)
4th 28/22 (1.27)
5th 24/25 (0.96)
6th 23/26 (0.88)
Clutch Multi-plate in oil bath, hydraulically operated.
Primary drive Spur gears, transmission ratio: 60/31 (1.75)
Final drive Chain
Transmission ratio: 16/44

Frame
Modular steel trellis connected with high strength bolts to aluminium side plates. Detachable rear frame.
Front suspension 43 mm upside-down fork. 120 mm wheel travel.
Rear suspension Aluminium alloy swingarm with reinforcement truss.
Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm.

Brakes
Front: Double 320 mm stainless steel floating disc. Four piston radial calipers.
Metal braided brake line.
Rear.: 245 mm stainless steel disc. Single piston caliper. Metal braided brake line.
2-channel Continental ABS system

Wheels In aluminium alloy
Front: 3.50 X 17″ Rear: 6.00 X 17″
Tyres Radial tubeless;
front: 120/70 ZR 17
rear: 180/55 ZR 17

Dimensions
Overall length 2,265 mm
Overall width: 800 mm (at handlebars)
Max. height 1,210 mm (at windshield)
Seat height: 810 mm
Wheelbase: 1,440 mm
Trail: 109 mm
Rake angle: 25.7°
Tank capacity 16 litres

 

 

2009 Aprilia Shiver 750 GT – USA Specifications
MSRP: $TBD USD


TBA

 

2009 Aprilia Shiver 750 GT – Canada Specifications
MSRP $TBD CDN

TBA

 

 

2009 Aprilia Shiver 750 GT – UK Specifications
MSRP: £TBD

TBA

About Michael Le Pard 866 Articles

“Mr. Totalmotorcycle”. Owner and Founder of Total Motorcycle. Supporting Motorcyclists and Motorcycling for 18 great years.

Be the first to comment

Leave a Reply