
Back to 2014 Moto Guzzi Motorcycle Model Review Page
Click photos to enlarge. Our big, clean bike pics make great desktop wallpaper.
2014 Moto Guzzi Stelvio 1200 NTX
2014 Moto Guzzi Stelvio 1200 NTX
2014 Moto Guzzi Stelvio 1200 NTX
2014 Moto Guzzi Stelvio 1200 NTX
2014 Moto Guzzi Stelvio 1200 NTX
2014 Moto Guzzi Stelvio 1200 NTX Review
2014 Moto Guzzi Stelvio 1200 NTX on Totalmotorcycle.com
Riding pleasure at its best…
Named after the famous Alpine pass that connects Valtelline Valley to Vinschgau Valley with 84 amazing s-bends between them, Stelvio has launched Moto Guzzi back among the stars of the maxi enduro world.
Looking at it, you can picture it completely at home not only amid the Alpine passes but even on the tracks of the Sahara, thanks to that special design that conjures up images of the great African marathons. Just note how its large, 32-litre tank and top fairing are united in a light fairing that combines the double headlight assembly, flush-mounted to protect it from any possible damage in the event of a fall.
Even the cockpit, containing a full range of instruments and designed to take a GPS navigation system, is conceived for travellers who will appreciate the possibility to adjust the windshield height and have the luggage rack integrated with the passenger grab handle and the fixings for the side panniers.
The heart beating inside this magnificent touring bike is the renowned V-shaped 90° transverse twin-cylinder “QV”1.2 engine – the highest performer of all the engine families manufactured at Mandello del Lario, which has now reached exclusive levels as far as its technical/performance development is concerned.
This version can boast careful attention to achieve more silent and smoother running, whilst tweaking the electronic control, timing and cooling system.
The integrated ignition and injection ECU exploits the signals sent by the two lambda probes to guarantee adequate feeding throughout the entire combustion cycle, improving the response to throttle control and low-to-mid-range power delivery, as well as notably reducing consumption and harmful emissions. The ATC (advanced traction control) system is also used: this system controls ignition advance and injection to cut torque delivery whenever a sudden loss of grip is detected so as to help the rider to remain in control under extreme, unexpected conditions. Like ABS, this device can be excluded.
In terms of performance, the “QV” boasts a maximum torque of over 113 Nm delivered at a mere 5,800 rpm, and easily reaches a peak in output of over 105 HP; it practically reaches an automobile-level speed of 7,250 rpm.
The NTX is the more “adventurous” version of the Stelvio 8V, sharing all the technical features of the basic version but standing out for the sturdy, imposing “armour” that embraces it and comprises the oil sump guard, engine guard, cylinder guard, full cover hand-guards and extra large windshield with additional appendages to protect the rider and his bike from any dangers throughout his trip.
A bike dedicated to long haul travellers naturally needs luggage space, hence the spacious aluminium panniers and additional halogen lights. Even more luxury options are available on the accessory catalogue including a GPS navigator installation kit, heated hand-grips, CA.RC protection (Compact Reactive Cardan Shaft Drive), aluminium top box for the NTX or side wind deflectors, extra large windshield, dedicated body coloured plastic polymer panniers and top box kit for the 8V version.
With 84 hairpin corners at an altitude over 9,000 feet, the Stelvio Pass in the Italian Alps is known as the “greatest driving road” in the world and it’s also the testing ground for the Moto Guzzi Stelvio 1200 NTX ABS. The Stelvio 1200 NTX ABS brings together Moto Guzzi character with state-of-the-art performance, design and an 8.5 gallon gas tank perfect for long distance riding . It comes standard with ABS, Automatic Traction Control, aluminum side bags, hand guards, and adjustable wind screen, saddle height, handlebar, clutch levers and foot pegs.
The Bike
Named after the famous Alpine pass that connects Valtelline Valley to Vinschgau Valley with 84 amazing s-bends between them, the Stelvio 1200 NTX brings together Guzzi character with state-of-the-art performance and design. The Stelvio has reached a new level thanks to the technical and functional upgrades on the new Stelvio 1200 NTX.
It all starts with design. The Guzzi design team has streamlined the Stelvio by rounding off the fuel tank and integrating it with the lightweight half-fairing. The new half-fairing improves wind protection and flows seamlessly into the twin headlight assembly. The latter feature is a distinctive element of the Stelvio design, and the only detail inherited from the previous version.
The front fairing, windscreen and the half-fairing with integrated turn signals are all brand new elements that together, give the front-end of the Stelvio 8V a cutting-edge look. It has an original design, but it is above all more functional and versatile, qualities that are of the utmost importance in the Adventure Touring segment.
The styling compared to the previous version: more efficient aerodynamic protection, thanks to the new top fairing and practically twice fold range capacity thanks to the outstanding new fuel tank with a 32 litre record capacity.
The heart that beats inside this touring bike is the renowned V-shaped 90° transverse twin-cylinder “Four valve” engine, the highest performer among all the families of engines manufactured at Mandello del Lario, which has now reached exclusive levels as far as its technical/performance development is concerned.
This latest version can boast the careful attention paid to achieve a more silent and smooth running of the engine, whilst tweaking the electronic control, timing system and cooling system. The brand new integrated ignition and injection ECU now exploits the signals sent by the two lambda probes to guarantee adequate feeding throughout the entire combustion cycle, improving response to the throttle control, low-to-mid-range power delivery further to consumptions and emissions. The ECU also includes the ATC system to prevent sliding: this system controls ignition advance and injection to cut torque delivery whenever a sudden loss of grip is detected so as to help the rider to remain in control under extreme, unexpected conditions. The system can be deactivated, just like ABS.
The engine now boasts a maximum torque of over 83 foot-pounds delivered at a mere 5,800 rpm and easily reaches a peak horsepower of 105 HP at 7,250 rpm.
2014 Moto Guzzi Stelvio 1200 NTX Totalmotorcycle.com Key Features
o NTX STANDARD EQUIPMENT
o ABS;
o ATC traction control;
o Black satin-finish aluminium side panniers;
o Cylinder guards;
o Long-range lights;
o Aluminium sump guard;
o Hand guards;
o Spoked wheels;
o Extra large windshield with side wind deflectors
STELVIO 1200 8V STANDARD EQUIPMENT
o ABS;
o ATC traction control;
o Alloy wheel rims.
ENGINE
” 1200 90° V-shaped Twin-cylinder “QV”
” Single overhead camshaft timing system
” Two lambda probes.
” Single plate clutch.
” Transmission with compact reactive cardan shaft drive.
” 6-gear gearbox.
” Euro 3.
FRAME
” High tensile steel upper dual beam frame.
” Front fork with 45 mm stanchions, adjustable pre-load and hydraulics.
” Shock absorber with adjustable pre-load and rebound fitted with a new more preloaded spring.
” Rear suspension with progressive articulation single arm.
” 4 horizontally opposed piston front brake system with new 320 mm discs, ABS (that can be disengaged).
” Rear 282-mm disc brake, floating calliper with two parallel pistons. ABS (that can be disengaged)
” Rear tyre 150/70-17.
” Front tyre 110/90- 19.
STANDARD OUTFIT:
” Continental ABS (can be disengaged)
” ATC system as standard
” New instrument panel with increased scale fuel level indicator.
” Alloy wheel rims
” Heated hand-grip fixture.
” Satellite navigator fixture.
NTX OUTFITTING:
” Aluminium panniers
” Aluminium sump guard.
” Steel engine guard.
” Integral hand-guards.
” Additional headlamp
” Spoked wheels
” Extra large windshield
” Supplementary air deflectors
” ABS as standard
PROUDLY MADE IN ITALY
Since 1921, the Moto Guzzi eagle flies high. The legend has reached the highest peak with the California. From the V7 Police to the EV special, it has radically changed the concepts of design and performance.
Hand built in the factory in Mandello del Lario (Como, Italy), where the Moto Guzzi are born continuously since 1921, everyone is distinguished by the craftsmanship with which each component is assembled. Attention that makes every Moto Guzzi California a unique piece, able to marry and to emphasize the strong personality of a passionate and exclusive clientele.
2014 Moto Guzzi Stelvio 1200 NTX Totalmotorcycle.com Features and Benefits
COMFORT:
Unstoppable long-time tourers.
The Moto Guzzi Stelvio 1200 8V and NTX are great tourers that can also be used off-road, and with excellent performance on asphalt. These characteristics emerge immediately once you are seated on the bike, where the perception of carefully-designed ergonomics can be felt straight away: saddle, footrests and handlebar form a perfect triangle for all users. Moreover, for the perfectionists, there is still room for minor adjustments: windshield, saddle height (820 or 840 mm), handlebar inclination, levers, pedals, as well as race-style adjusters for hydraulic compression/rebound damping.
In a few seconds, everything is at the right place to face any challenge, from city traffic to the most inaccessible off-road paths. In motion, reduced vibration and the efficient aerodynamic protection offered by the top fairing and windshield and the side wind deflectors (dedicated for NTX) ensure comfort for both rider and passenger – ideal for tackling long trips.
With regards the controls, the dashboard has a 12V power outlet, a fuse box compartment and an instrument panel with analogue rpm indicator and a display with a six-mark fuel indicator that integrates with other on-board computer functions such as average and current consumption, average speed, trip time, maximum speed peak reached and diagnostics. The display also lets you control hand grip heating (option) and activate the ATC system, fitted as standard on both models.
CHASSIS, SUSPENSION AND BRAKES
Designed for non conventional paths.
You should not be mislead by its luxury off-road appearance: the driving effectiveness of the Moto Guzzi Stelvio 1200 8V and NTX is superior to the average of many road motorcycles, despite being equipped for the unexpected and to withstand off-road driving strain.
The secret is the new upper twin spar frame, made of high-strength steel, with 2.5mm thick directional tubes, where the engine is anchored through six connecting points, two more than in usual frames, which give high rigidity to the assembly at twisting moments.
Chassis positions have been defined to facilitate handling: a headstock with a 27° inclination for a 125mm trail, improved by a 1535-mm wheelbase to ensure impeccable steering precision.
High quality suspension whose adjustable pre-load and hydraulic response during compression and rebound combine to ensure instant, smooth response to pressure on the handlebar. The front end is controlled by a new upside-down Marzocchi fork with 45mm stanchions and 170mm travel whereas, at the rear, suspension kinematic mechanisms with a progressive rising rate are moved by a Sachs unit that works on a 155mm stroke.
The refined suspension department guarantees a neutral setting at all times, whether coming out of a bend (with the action of the 105 horsepower generated by the “QV” engine) or braking (with the quick deceleration generated by the three-disc Brembo braking system supported by Continental ABS (that can be disengaged), fitted as standard on NTX and Stelvio 1200 8V). Both have a pair of 320mm front discs and a rear disc of 282mm.
With regards the wheels, the two versions are very different: tubeless spoke wheels for the NTX, and in light alloy for the 8V. Both take a rear tyre of 150/70-17.
ENGINE AND TRANSMISSION.
The “QV” evolution continues.
The Moto Guzzi Stelvio 1200 8V and NTX boast the latest evolution of the “QV” 1.2 engine”, universally acknowledged as the most advanced version of the legendary V-shaped 90° transverse twin-cylinder.
This highly sophisticated mechanical gem, which is unique in terms of both architecture and engineering clarity, is built using advanced components and technical solutions. Worth mentioning are the raised cam profile single camshaft timing system driven by silent “Morse” type chains” with hydraulic chain tensioners, the forged pistons with three rings cooled by oil jets in the crankcase, the ultra-light valves in special alloy steel with 5mm stems, and the conical valve springs that eliminate resonance and power loss at high engine speeds. Lubrication and cooling are ensured by two coaxial pumps that circulate lubricant through a separate duct in the head up to the exhaust valve seats, where the highest temperatures develop. The cylinders feature an extremely modern design, with the cooling fins tapered toward the front of the cylinders, while the valve covers – which proudly flaunt the “QV” moniker – feature a floating mounting system to reduce mechanical noise.
As far as the fuel system goes, the “QV” engine uses the new Marelli IWP 189 injectors on the intake duct of the sizeable 50mm throttle bodies, whereas the integrated ignition and injection ECU now exploits the signals from two lambda probes to guarantee adequate fuel metering throughout the entire combustion cycle, improving response to throttle control and mid-range power delivery, as well as consumption and emission levels. In terms of electronic components, the Stelvio 1200 8V and NTX adopt the ATC anti-slide system – an invaluable aid to keep out of trouble in poor grip conditions.
The gearbox is a genuine 6-speed mechanical gem of engineering, that excels for: quiet operation, easily selectable neutral, and precision. This is also thanks to the introduction of the quiet and smooth single-plate clutch.
2014 Moto Guzzi Stelvio 1200 NTX – Totalmotorcycle.com USA Specifications/Technical Details
US MSRP Price: $15,990 USD
ENGINE
Type 90° V-twin engine, 4-stroke
Cooling Air and oil and, independent cooling pumps
Engine capacity 1,151 cc
Bore and stroke 95 x 81.2 mm
Compression ratio 11:01
Maximum power 105HP (77 kW) at 7,250 rpm
Maximum torque 83.3 Ft. Lbs. (113 Nm) at 5,800 rpm
Fuel supply / Ignition Multipoint sequential electronic ignition, Magneti Marelli IAW5A phased, alfa-n system; two Ø 50mm throttle body, Weber IWP 189 injectors, two lambda probes.
Exhaust system stainless steel, 2-in-1 type, three-way catalytic converter with lambda probe
CHASSIS / SUSPENSION / BRAKES
Gearbox 6-speed
Final drive Compact reactive cardan shaft drive system (CA.R.C.); double cardan joint and floating bevel gear seat, drive ratio 12/44 = 1: 3.666
Clutch single-disc with integrated anti-vibration buffer
Chassis High yield strength tubular steel with integrated engine
Wheelbase 60.4 in. / 1,535 mm
Trail 4.92 in. / 125 mm
Headstock angle 27°
Steering angle 34°
Front suspension completely adjustable USD fork (spring preload and hydraulic compression and rebound damping) with 45 mm diam.
Front wheel travel 6.69 in. / 170 mm
Rear suspension single arm with progressive linkage, monoshock with adjustable hydraulic rebound damping and spring preload adjuster knob
Rear wheel travel 6.10 in. / 155 mm
Front brake Brembo 320 mm stainless steel floating double discs, radial calipers with 4 horizontally opposed pistons
Rear brake Brembo 282 mm stainless steel fixed disc, floating caliper with 2 parallel pistons
Wheels Light alloy (tubeless, spoked)
Front wheel rim 2.50” x 19”
Rear wheel rim 4.25” x 17”
Front tire 110/80 R19”
Rear tire 150/70 R17”
DIMENSIONS
Length 88.53 in. (2250 mm)
41.33 in. (1,050 mm)
Height 58.26 in. (1,480 mm)
Saddle height 32 – 33 in. (820-840 mm) adjustable
Minimum ground clearance 8.26 in. (210 mm)
Curb weight (Ready to Ride) 598 lbs (272 Kg)
Fuel tank capacity 8.5 Gallons (32 liters)
1.8 Gallons (Reserve) / 7 liters (Reserve)
2014 Moto Guzzi Stelvio 1200 NTX – Totalmotorcycle.com Canadian Specifications/Technical Details
Canada MSRP Price: $16,290 CDN
ENGINE
Type 90° V-twin engine, 4-stroke
Cooling Air and oil and, independent cooling pumps
Engine capacity 1,151 cc
Bore and stroke 95 x 81.2 mm
Compression ratio 11:01
Maximum power 105HP (77 kW) at 7,250 rpm
Maximum torque 83.3 Ft. Lbs. (113 Nm) at 5,800 rpm
Fuel supply / Ignition Multipoint sequential electronic ignition, Magneti Marelli IAW5A phased, alfa-n system; two Ø 50mm throttle body, Weber IWP 189 injectors, two lambda probes.
Exhaust system stainless steel, 2-in-1 type, three-way catalytic converter with lambda probe
CHASSIS / SUSPENSION / BRAKES
Gearbox 6-speed
Final drive Compact reactive cardan shaft drive system (CA.R.C.); double cardan joint and floating bevel gear seat, drive ratio 12/44 = 1: 3.666
Clutch single-disc with integrated anti-vibration buffer
Chassis High yield strength tubular steel with integrated engine
Wheelbase 60.4 in. / 1,535 mm
Trail 4.92 in. / 125 mm
Headstock angle 27°
Steering angle 34°
Front suspension completely adjustable USD fork (spring preload and hydraulic compression and rebound damping) with 45 mm diam.
Front wheel travel 6.69 in. / 170 mm
Rear suspension single arm with progressive linkage, monoshock with adjustable hydraulic rebound damping and spring preload adjuster knob
Rear wheel travel 6.10 in. / 155 mm
Front brake Brembo 320 mm stainless steel floating double discs, radial calipers with 4 horizontally opposed pistons
Rear brake Brembo 282 mm stainless steel fixed disc, floating caliper with 2 parallel pistons
Wheels Light alloy (tubeless, spoked)
Front wheel rim 2.50” x 19”
Rear wheel rim 4.25” x 17”
Front tire 110/80 R19”
Rear tire 150/70 R17”
DIMENSIONS
Length 88.53 in. (2250 mm)
41.33 in. (1,050 mm)
Height 58.26 in. (1,480 mm)
Saddle height 32 – 33 in. (820-840 mm) adjustable
Minimum ground clearance 8.26 in. (210 mm)
Curb weight (Ready to Ride) 598 lbs (272 Kg)
Fuel tank capacity 8.5 Gallons (32 liters)
1.8 Gallons (Reserve) / 7 liters (Reserve)
2014 Moto Guzzi Stelvio 1200 NTX – Totalmotorcycle.com European/UK Specifications/Technical Details
UK/European MSRP Price: £12632 GBP (On The Road).
Type : 90° V-twin engine, 4-stroke
Cooling : through air and oil and an independent cooling pump
Engine capacity : 1,151 cc
Bore and stroke : 95 x 81.2 mm
Compression ratio : 11: 1
Timing system diagram : intake valve opens 36° BTDC
(1-mm checking clearance) intake valve closes 62° ABDC
exhaust valve opens 58° BBDC
exhaust valve closes 30° ATDC
Maximum power : 77 kW (105HP) at 7,250 rpm
Maximum torque : above 113 Nm at 5,800 rpm
Fuel supply / Ignition : Multipoint sequential electronic ignition, Magneti Marelli IAW5A phased, alfa-n system; two Ø 50mm throttle bodies, Marelli IWP 189 injectors, two Lambda probes.
Starter : Electric
Spark plugs : NGK PMR8B (Long Life)
Exhaust system : stainless steel, 2-in-1 type, three-way catalytic converter with double lambda probe
Type approval : Euro 3
TRANSMISSION
Gearbox : 6-speed
Gear ratio values : 1st 17/38 = 1 : 2.235
: 2nd 20/34 = 1 : 1.700
: 3rd 23/31 = 1 : 1.348
: 4th 26/29 = 1 : 1.115
: 5th 31/30 = 1 : 0.968
: 6th 29/25 = 1 : 0.862
Primary drive : with helical teeth, ratio 26/35 = 1: 1,346
Final drive : Compact reactive cardan shaft drive system called CA.R.C.; double cardan joint and floating bevel gear seat, drive ratio 12/44 = 1: 3.666
Clutch : single-disc with integrated anti-vibration buffer
CHASSIS
Chassis : High yield strength tubular steel with integrated engine
Centre to centre distance : 1,535 mm
Trail : 125 mm
Headstock angle : 27°
Steering angle : 34°
Front suspension : completely adjustable fork (spring pre-load and hydraulic compression and rebound damping) with 45 mm diam. upside down stanchions and caliper mounting for radial brake calipers
Front wheel travel : 170 mm
Rear suspension : single arm with progressive linkage, monoshock with adjustable hydraulic rebound damping and spring pre-load adjuster knob
Rear wheel travel : 155 mm
Front brake : dual 320 mm stainless steel floating discs, radial calipers with 4 horizontally opposed pistons
Rear brake : 282 mm stainless steel fixed disc, floating caliper with 2 parallel pistons
Wheels (NTX) : Light alloy (tubeless, spoked)
Front wheel rim : 2.50″ x 19″
Rear wheel rim : 4.25″ x 17″
Front tyre : 110/80 R19″
Rear tyre : 150/70 R17″
ELECTRICAL SYSTEM
System voltage : 12 V
Battery : 12V – 18 Ah
Alternator : 12 V – 550 W
DIMENSIONS
Length : 2250 mm
Width (NTX) : 920 mm (1,050 mm)
Height (NTX) : 1,430 mm (1,480 mm)
Saddle height : 820-840 mm (adjustable)
Minimum ground clearance : 210 mm
Kerb weight. (NTX) : 257 Kg (272 Kg)
Fuel tank capacity : 32 litres
Reserve : 7 litres
Specifications, features and prices to change by manufacturer without notice. All information correct as of posted date.
Be the first to comment