Regular, Super, Ultra, Racing, AVgas, Octane Plus…
< Back Motorcycle Performance Guide Next > Motorcycle Dyno Charts
& Specifications (in progress)
Gasoline (petrol) Guide
(Comsumer and Racing Gas)
Sparkplugs (soon) Tires (tyres) (soon) Aftermarket filters
(Air, Fuel and Oil filters)
We can all agree that gasoline or petrol is one very important component in our motorcycle. Without it, we are not going anywhere!
There is a lot of misinformation about gasoline/petrol our there. Hopefully this Gasoline Performance Guide will help you and others better understand what you are putting in your engine.
This is a type of chemical compound referred to as a cyclic organic due to it’s circular structure. They are found in nearly all gasolines, normally as toluene. Xylene is less common, and benzene is restricted to very low levels due to toxicity.
A gasoline contains various hydrocarbons that boil at different temperatures. As a result, the gasoline boiling range can extend from 800F to a maximum of 437F. This is in contrast to water that bolls only at 212F at sea level.
Definition: A value used to indicate the resistance of a motor fuel to knock. Octane numbers are based on a scale on which isooctane is 100 (minimal knock) and heptane is 0 (bad knock). Also Known As: Octane Rating
Example: A gasoline with an octane number of 92 has the same knock as a mixture of 92% isooctane and 8% heptane.
Research Octane Number (RON)
is measured under mild conditions and is more important in controlling part throttle knock.
Motor Octane Number (MON)
is measured under more severe conditions and is most important for octane satisfaction at wide open throttle.
Anti-Knock Index (AKI)
is the average of the RON and MON. This is the number posted on the retail gasoline pumps normally indicating 87, 89, or 92 octane. Racing gasoline have AKI’s from 100 to 118.
These are required in street gasolines in many areas of the U.S. to help reduce exhaust emissions. The two most common oxygenated compounds are Methyl Tertiary Butyl Ether (MTBE) and Ethanol (This is an alcohol).
Reid Vapor Pressure (RVP):
Normally measured in psi, RVP is a measure of the front end volatility of the (RVP)gasoline. This is important for getting a carburetor car started in cold weather. Summer RVP = 7 psi, and winter RVP = 13.5 psi.
Measures the density of gasoline compared to water A specific gravity of 0.720 means that the gasoline weighs 0.72 times as much as water, or it is 72% of the weight of water. Most gasolines weigh about 6.2 pounds per gallon.
Used in referring to the ease with which a gasoline turns from a liquid to a vapor. Low volatility refers to low RVP, indicating less light hydrocarbons in the gasoline front end. Southern California summer grade gasolines have low volatility. Winter grade gasolines in Michigan are high volatility, or high RVP to make the engine easier to start in sub-zero temperatures.