2008 Harley-Davidson Police XL883 883 Sportster

– 2008 Harley-Davidson Police XL883 883 Sportster

2008 Harley-Davidson Police XL883 883 Sportster

For one hundred years, Harley-Davidson police motorcycles have put in milllions of miles serving law enforcement agencies around the world.

2008 Highlights

Electronic sequential port fuel injection (ESPFI) with O2 sensors
Optional next-generation smart security system
Low-effort clutch assembly for easier shifting
Carbon fiber final drive belt
Enhanced cockpit layout with revised gauges, more features

US SPECIFICATIONS:

2008 Harley-Davidson Police XL883 883 Sportster

DIMENSIONS U.S. IMPERIAL UNITS

LENGTH 90.1 in.

OVERALL WIDTH 32.7 in.

OVERALL HEIGHT 45.70 in.

SEAT HEIGHT

SPRUNG SEAT 27.3 in.

SPRUNG SEAT (UNLADEN) 29.3 in.

GROUND CLEARANCE 5.6 in.

RAKE 29.6°

TRAIL 4.6 in.

WHEELBASE 60.0 in.

FUEL CAPACITY (includes 0.8 gal. reserve) 3.3 gal.

RESERVE FUEL CAPACITY 0.8 gal.

OIL CAPACITY 3.6 qts.

WEIGHT

DRY WEIGHT 563 lbs.

VEHICLE WEIGHT IN RUNNING ORDER 583 lbs.

GROSS VEHICLE WEIGHT RATING 1000 lbs.


POWERTRAIN
ENGINE Air-cooled Evolution®

DISPLACEMENT 53.86 cu. in.

BORE x STROKE 3.00 x 3.81 in.

ENGINE TORQUE (NORTH AMERICA PER SAE J607) 55 ft. lbs. @ 3500 rpm

FUEL SYSTEM Electronic Sequential Port Fuel Injection (ESPFI)

COMPRESSION RATIO 8.9:1

MILES PER GALLON

CARB. N/A

ESPFI 60 mpg hwy/45 mpg city

PRIMARY DRIVE Chain; 57/34 ratio

FINAL DRIVE Belt; 68/28 ratio

CLUTCH 9-plate, wet

TRANSMISSION 5-speed

GEAR RATIO (OVERALL)

1st 10.782

2nd 7.702

3rd 5.728

4th 4.748

5th 4.071


WHEELS/TIRES
WHEELS

FRONT Silver, 13-spoke cast aluminum

REAR Silver, 13-spoke cast aluminum

TIRE SIZE

FRONT (D401F) 100/90-19 57H

REAR (D401) 150/80B16 71H


ELECTRICAL
BATTERY (PER BATTERY COUNCIL INTERNATIONAL RATING) Sealed, maintenance-free, 12-volt, 28 amp/hour, 270 cca (per Battery Council International rating)

CHARGING Single phase, 30 amp system (357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V

STARTING 1.2 kw Electric with solenoid shift starter motor engagement

LIGHTS (PER COUNTRY REGULATION)

HEADLAMP Quartz halogen; 55-watt low beam, 60-watt high beam

TAIL/STOP LIGHTS 8w/28w (5w/21w)

TURN SIGNAL LIGHTS Self-canceling; 28w (21w)

INDICATOR LAMPS High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, security system (optional)

INSTRUMENTS Speedometer, odometer, dual resettable tripmeter, diagnostic readout


CHASSIS
FRAME Mild steel, tubular frame; circular sections, cast junctions

SWING ARM Mild steel, rectangular tube sections; stamped junctions, MIG welded

FRONT FORK 39 mm

REAR SHOCK Coil over, dual-adjustable preload

BRAKES (DIAMETER X WIDTH)

CALIPER TYPE Dual-piston front and single-piston rear

ROTOR TYPE Patented, uniform expansion rotors

FRONT 11.5 in. x .20 in.

REAR 11.5 in. x .23 in.

SUSPENSION TRAVEL

FRONT 5.6 in.

REAR 4.1 in.

LEAN ANGLE (PER SAEJ1168) (RIGHT/ LEFT) 32o / 32o

EXHAUST SYSTEM Chrome staggered shorty duals


COLOR OPTIONS
Birch White, Glacier White Pearl, Vivid Black



UNIQUE FEATURES
Mid-mount brake and shift lever controls; stainless steel, low-rise handlebar



Measurement reflects 180 lb/81.7 kg operator weight.

Values are nominal. Performance varies by country.

Standard and optional fuel systems vary by country.

Availability may vary from dealer to dealer, and is subject to change without notice.



Harley-Davidson reserves the right to discontinue models or change specifications at any time without incurring any obligations. Vehicle specifications may vary from country to country depending on local laws, and some models are not available in certain countries.

DIMENSIONS METRIC UNITS

LENGTH 2288.5 mm

OVERALL WIDTH 830.6 mm

OVERALL HEIGHT 1160.8 mm

SEAT HEIGHT

SPRUNG SEAT 693.4 mm

SPRUNG SEAT (UNLADEN) 744.2 mm

GROUND CLEARANCE 141.0 mm

RAKE 29.6°

TRAIL 116.8 mm

WHEELBASE 1524.00 mm

FUEL CAPACITY (includes 0.8 gal. reserve) 12.5 L

RESERVE FUEL CAPACITY 3.0 L

OIL CAPACITY 3.4 L

WEIGHT

DRY WEIGHT 255 kg

VEHICLE WEIGHT IN RUNNING ORDER 264 kg

GROSS VEHICLE WEIGHT RATING 454 kg


POWERTRAIN
ENGINE Air-cooled Evolution®

DISPLACEMENT 883 cm3

BORE x STROKE 76.20 x 96.82 mm

ENGINE TORQUE (NORTH AMERICA PER SAE J607) 74.6 NM @ 3500 rpm

FUEL SYSTEM Electronic Sequential Port Fuel Injection (ESPFI)

COMPRESSION RATIO 8.9:1

MILES PER GALLON

CARB. ESPFI

PRIMARY DRIVE Chain; 57/34 ratio

FINAL DRIVE Belt; 68/28 ratio

CLUTCH 9-plate, wet

TRANSMISSION 5-speed

GEAR RATIO (OVERALL)

1st 10.782

2nd 7.702

3rd 5.728

4th 4.748

5th 4.071


WHEELS/TIRES
WHEELS

FRONT Silver, 13-spoke cast aluminum

REAR Silver, 13-spoke cast aluminum

TIRE SIZE

FRONT (D401F) 100/90-19 57H

REAR (D401) 150/80B16 71H


ELECTRICAL
BATTERY (PER BATTERY COUNCIL INTERNATIONAL RATING) Sealed, maintenance-free, 12-volt, 28 amp/hour, 270 cca (per Battery Council International rating)

CHARGING Single phase, 30 amp system (357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V

STARTING 1.2 kw Electric with solenoid shift starter motor engagement

LIGHTS (PER COUNTRY REGULATION)

HEADLAMP Quartz halogen; 55-watt low beam, 60-watt high beam

TAIL/STOP LIGHTS 8w/28w (5w/21w)

TURN SIGNAL LIGHTS Self-canceling; 28w (21w)

INDICATOR LAMPS High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, security system (optional)

INSTRUMENTS Speedometer, odometer, dual resettable tripmeter, diagnostic readout


CHASSIS
FRAME Mild steel, tubular frame; circular sections, cast junctions

SWING ARM Mild steel, rectangular tube sections; stamped junctions, MIG welded

FRONT FORK 39 mm

REAR SHOCK Coil over, dual-adjustable preload

BRAKES (DIAMETER X WIDTH)

CALIPER TYPE Dual-piston front and single-piston rear

ROTOR TYPE Patented, uniform expansion rotors

FRONT 292.1 mm x 5.08 mm

REAR 292.1 mm x 5.84 mm

SUSPENSION TRAVEL

FRONT 141.00 mm

REAR 104.10 mm

LEAN ANGLE (PER SAEJ1168) (RIGHT/ LEFT) 32o / 32o

EXHAUST SYSTEM Chrome staggered shorty duals


COLOR OPTIONS
Birch White, Glacier White Pearl, Vivid Black



UNIQUE FEATURES
Mid-mount brake and shift lever controls; stainless steel, low-rise handlebar



Measurement reflects 180 lb/81.7 kg operator weight.

Values are nominal. Performance varies by country.

Standard and optional fuel systems vary by country.

Availability may vary from dealer to dealer, and is subject to change without notice.

Harley-Davidson reserves the right to discontinue models or change specifications at any time without incurring any obligations. Vehicle specifications may vary from country to country depending on local laws, and some models are not available in certain countries.

IFB Specs:

2008 Harley-Davidson® XL 883 Sportster®
1. QUANTITY: [Insert Quantity] 2008 Harley-Davidson® XL 883 Sportster® Law Enforcement Motorcycles

SCOPE OF SPECIFICATIONS
These specifications describe the mechanical and comfort requirements for solo, certified law enforcementmotorcycles which will be used by the [insert agency/department name].

SPECIFICATIONS
Proposed XL 883 Sportster motorcycles to be in full compliance as follows:
A. Engine Piston displacement of not less than 883cc Electronic Sequential Port Fuel Injection V-Twin, air-cooled, with two cylinders equipped with overhead valves, producing minimal vibration frequencies and magnitudes. Engine and transmission isolated from motorcycle frame through a rubber mounting system.
1. Powertrain silver powder coated engine with polished treatment.
2. Carburetor
3. Chrome, staggered dual exhausts
B. Clutch / Transmission
1. Clutch shall be of the latest multiple nine (9) plate design, wet.
2. Transmission to be of latest design, manual type, with not less than five (5) forward speeds.
3. Primary Drive, chain.
4. Final belt drive.
5. Gear Ratios
1st – 10.782
2nd – 7.702
3rd – 5.728
4th – 4.748
5th – 4.071
C. Brakes
Disc brakes for both front and rear wheels. Front brake having dual 11.5-inch diameter drilled discs; rear brake shall be single disc. Brakes shall be relatively free of heat fade, with dual piston front and single piston rear, featuring patented, uniform expanding rotors.
D. Suspension
1. System permitting optimum handling as required in law enforcement.
2. Front forks, 39 mm.
3. Rear shocks, coil over type, dual adjustable preload.
4. Rear suspension shall have swing arms having mild steel, rectangular tube sections, stamped
junctions, MIG welded.
E. Wheels / Tires
1. Silver, 13 Spoke Aluminum Cast Alloy wheels required; rim material shall be impermeable to
compressed air.
2. Tubeless type tires to have non-skid tread, designed to operate on paved roads.
3. Manufacturer, Dunlop front D401F MH100/90-19, rear D401 MH150/80B -16 blackwall tires.
F. Fuel Tank
Fuel tank to have a capacity of not less than three and three tenths (3.3) U.S. gallons (or 12.5 liters). Must provide reserve fuel capacity of 0.8 gallon (or 3.0 liters) when main supply is exhausted.
G. Electrical System
Electrical system shall be nominal 12-volt as follows:
1. Battery. Sealed, heavy-duty maintenance-free, 12-volt, minimum rated capacity – 12 ampere hours
per Battery Council International (BCI) rating, 200 cold cranking amps.
2. Ignition. Non-waste spark, alpha control.
3. Charging System. Single-phase 30-amp high output alternator and solid state regulator.
4. Connectors. Industrial grade throughout.
5. Hand Controls. Water-resistant switches.
6. Starting System. 1.2 kW electric with Bendix-type engagement required.
7. Horn. Sound level audible above motorcycle and traffic-generated noise.
8. Lighting. Each motorcycle shall be provided with the following lighting equipment:
a. Quartz Halogen Headlight.
b. Tail light.
c. Turn Signals, self-canceling system.
9. Headlamp. Quartz halogen 55-watt low beam and a 60-watt high beam.
H. Visual Displays
1. Speedometer. Analog speedometer, to indicate 0-120mph (or kph equivalent).
2. Odometer. Calibrated, cumulative.
3. Re-settable trip meter and diagnostic readout.
4. Neutral
5. Turn signals.
6. High beam indicator.
I. Feature Requirements
1. Seat. Latest solo saddle.
2. Handlebars. Stainless steel, low-rise handlebars.
3. Side Stand. Jiffy stand, rubber bumper design.
4. Drive. Final belt drive, Gates Aramid fiber, reinforced Poly Chain®.
5. Mirrors. Two (2) standard mirrors.
6. Wheelbase. 60 inches (1524.0 mm).
7. Dry Weight. 563 lbs., Running Order. 583 lbs.
8. Service Intervals. 1st 1000 miles and then every 5000 miles thereafter.
9. Warranty. 24 months, unlimited mileage.
J. Additional Options
1. Pursuit Lamp Kit, Part Number 68746-03A.
2. Red and blue pursuit lights; works with Windshield, Part Number 57716-01
(law enforcement application only)
3. Birch White Saddlebags, Part Number 91412-04AV
4. Vivid Black Saddlebags, Part Number 914012-04DH
5. Windshield Docking Hardware, Part Number 58164-96A
6. Detachable Windshield, Part Number 57716-01
7. Engine Guard Bar, Part Number 49060-04
8. Luggage Rack, Part Number 53495-95
9. Jiffy Stand Extension, Part Number 50250-04

2. LIFE CYCLE COST FORMULA
Award Factors The motorcycles selected through this bid offering should offer the Agency the lowest possible long term projected real cost.
1. Real cost to be determined using a Life Cycle Cost (LCC) model including initial purchase price,
average projected end of service duty life resale value, and projected comparable operating cost
statistics. Award will be made to compliant bidder meeting the specifications based on the lowest
LCC. The LCC value will be based on the initial bid value, fuel cost adjustments that differ from the
Agency standard, and resale value standard adjustments as necessary.
2. The Agency desires an option to sell these motorcycles back to the successful bidder.
[Please add any specific emergency equipment option requirements here]

3. CONDITIONAL BUY-BACK AGREEMENT
Bidder agrees to the conditional repurchase of these motorcycles for $______ each, subject to the following conditions:
a. Returned for repurchase within _____ months of original purchase date.
b. Returned fully equipped as originally delivered to the Agency.
c. Returned in operating condition as agreed by representatives of [bidder] and Agency.
d. Returned for conditional repurchase in sound, undamaged condition.
e. Routine maintenance during the service duty life has been performed and documented.
f. Returned units shall be accompanied by their individual regular maintenance record log in
mutually agreed upon form provided by the Agency.
g. Units returned are to be presented in lots of not less than ____ units per request.
Conditional Buy-Back Agreement, financial impact:
$ ____________ Initial Purchase Price per Unit
$ ____________ Less Conditional Repurchase per Unit
$ ____________ Ultimate Total per Unit Net Cost to Agency